Installation Instructions

Work one side of the tire off
the rim. Remove old tube.
Deflate tire. Remove any
puncturing objects.
Before installing, slightly inflate
new tube to give it shape.
Work tire back onto rim
being careful not to pinch
the tube. Use of tire levers
is recommended.
Insert tube valve through
rim hole. Gently push the
tube into place inside
the tire.
Ensure tire bead is consistently
seated around both sides of
tire. Inflate to proper PSI.
1 2 3
4 5 6
HOW TO INSTALL SLIME SELF-SEALING TUBES
NOTE: Slime is Not Guaranteed to seal sidewall punctures, pinch flats, glass cuts or punctures over 1/8" (3mm). Be sure to
remove any foreign puncturing objects from tire. If necessary, reinflate tire and rotate wheel to create seal. Prior to inflating or
deflating a Slime Self-Sealing Tube, rotate tire so valve is at the 10 or 2 o’clock position. This helps sealant to flow away from
the valve preventing it from clogging the valve or air source. Do not overinflate tire.
WARNING: Eye protection must be worn during installation.