Operation Manual

37. HEADPHONE VOL
Adjust headphone level.
42. MIC VOL
Adjust microphone level.
43. MASTER VOL
Adjust master level output
44. POWER BUTTON
Press the power switch to turn the unit on. To switch the POWER off press the POWER switch
again.
45. AC CORD
Used this cable to connect the AC mains power to the unit
46. DJ MIC
Plug XLR type microphone plug in here.
47. USB
Connect with the computer, record the playing music into this computer.
48. HEADPHONE JACKS
Used to connect for audio monitoring with headphones.
49. STEREO MAIN OUTPUT
Unbalanced RCA connectors controlled by the masterfader.
50. INPUT
Plug in the line level device such as tape deck or additional CD player here
51. LINE/PHONO INPUT SWITCH
Use this to allow either line level or phono level equipment to be plugged into your channel inputs. When phono
input is selected, your signal is fed directly to the high-quality RIAA phono pre-amplifiers. Line level sources will
overload the sensitive phono pre-amps and will sound very bad, so always be sure to toggle the line/phono switch
over to line before connection of line sources.
52. GND
Grounding lug for turntable connection. Always use this connection when using turntables.(your
turntable cable should have a grounding wire)