User's Manual Part 1

You see the following information:
R
current direction of travel
R
latitude coordinates
R
longitude coordinates
R
current height above mean sea level
R
number of satellites currently being
used
The bar underneath shows the following
information:
R
current height above mean sea level
R
current time (if route guidance is not
active) or remaining journey time to
next destination (intermediate stop,
final destination)
R
remaining distance to next destination
(intermediate stop, final destination)
R
expected arrival time at next destina-
tion (intermediate stop, final destina-
tion)
X
To close the compass display: press &.
Stopping route guidance
X
Press Stop route guidance in the "Nav-
igation" main menu (Y page 25).
Route guidance is interrupted.
Destination reached
When you reach your destination, a cheq-
uered flag is displayed on the right-hand
side of the display and route guidance is
ended automatically.
Navigation announcements
Switching navigation announcements on/
off
Option 1
X
To switch off: press control knob W
briefly during a navigation announce-
ment.
X
To switch on: press the arrow indicating
the direction of travel on the map
(Y page 38).
The current navigation announcement is
repeated.
i
Navigation announcements are muted in
the event of a traffic announcement, an
incoming call or during a phone call.
Option 2
X
Press the arrow at the bottom left of the
map (Y page 38).
The "Navigation" main menu appears.
X
Press d.
The "Settings" menu appears.
X
Press Speech output.
The "Speech output" menu appears.
X
Press Speech output again.
Depending on the previous setting, the
functions are deactivated or activated.
Announcing street names
X
Press the arrow at the bottom left of the
map (Y page 38).
The "Navigation" main menu appears.
X
Press d.
The "Settings" menu appears.
X
Press Speech output.
The "Speech output" menu appears.
X
Press Street names.
Depending on the previous setting, the
function is deactivated or activated.
40
>> smart high line radio.