Fitness band SKY Health Band Sky Phone LLC
[Quick Start Guide] You should charge the bracelet for 30mins before using it. Working condition for mobile Device Activate & Charge Make sure power is working normally before initial use. In case device is under low battery, connect the device to the charger.
Once the device connected to the app successfully, it will record and analyze your activities and sleep status automatically, please press the key on the device to switch into different display modes as following: 1. Normal Mode Time Mode --> Step Mode --> Calories Mode --> Heart rate Mode --> Distance Mode --> Alarm Mode 2.
on the key will be invalid, device switch into different display modes as following when normal press on the key: Sport Heart rate mode Sport Distance Mode Step Pedometer Mode 1 Sport Calories Mode Sport Time Mode Note：Long press the key 2s to exit the Sports Mode Download app Install APP: Go to App store or play store, download this APP: “Linklife” and install it. To use Linklife APP, make sure your mobile device connected with internet via Wi-Fi / 4G/ 3G.
1, Account set-up
2, Pair the device Please make sure the Bluetooth is ON and then open app ”Linklife” and go to bind. When searching and pairing device, please press on the key of device and activate the device (screen on). App will search the device automatically, choose the device name and connect the device to the app.
3, Calling and message reminder Check the device and open all the notification items 4, Sedentary reminder Open the Sedentary reminder, and settle the time quantum ,by the Sedentary reminder setting
5,, Heart Rate testing mode: HRM: Monitoring your heart rate effectively, Check the heart rate data as below page
6, Alarm Mode when it comes to the settled time,，the band will shake to make a reminder and shows alarm icon Choose Alarm Alert, then you can add alarm by the alarm setting, After time finished setting, pls choose the "confirm" to finished the sync.
7, Looking mobile phone Switch on the "find phone" in the APP. Long press the looking phone icon till in shakes, the searching mobile will ring if it is under ringing mode, will shakes one time if it under vibration mode. Functions Instruction Synchronization Information: Sleeping / Sports Just hold down screen , then pull down, after display , you can let go. Remind Alerts: Alarm alert, call alert, sedentary alert, etc.
Sleep Monitoring: Device could automatically recognize your status and monitoring the whole sleep progress with analyzing the deep sleep and light sleep hours;
Remote Camera Control: Device key or wrist gesture could control remote photograph shooting. Wrist gesture : You can use the bracelet by“wrist gesture” It is convenient to check the time by “wrist gesture”.
FCC Warning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
