Outdoor Furniture We are a professional furniture provider with top-notch factories and outstanding designs, Our mission is to provide consumers with new lifestyles. By collecting consumer feedback, we constantly improve our products and create more choices for consumers. If you want to create your space, We are an ideal choice. Always.
1. If there Is any damage, please kindly send clear photos of damaged parts to us as attachment, we well check and offer you best solution soon. 2. We attach great Importance to the customer experience of our products. If there's any concern,please contact us at any time, we will provide effective solutions 3. It is recommended to finish assembling by more than two people, so that it will be easier and also save your time.
For your safety concern, please do not stand under the metal shed in heavy wind or snow days. For safety, please use expansion screws to reinforce the posts to the ground. In extreme weather conditions,you can use a rope to pull the four corners of the gazebo to keep It stable. Please clear the snow off the roof in time for the heavy snowfall. Make sure all screws are tightened before use. Repeat to confirm all screws, buckles and straps every 90 days.
PRODUCT ASSEMBLY Place and "KEN-2" as shown in the picture and fix them within screws, and then install "TF" on the four corners for reinforcement.
PRODUCT ASSEMBLY H Mount the 4 "W-C" on the Shed Base Frame Assemble as shown.
PRODUCT ASSEMBLY Put "K68-5L" and "K68-5R" together as shown in the picture, and then install 4 pieces of 'C4"in the designated position, and use "F2* screws fo fix | ess spokesmen 2 amb Boa y cant
PRODUCT ASSEMBLY Fasten the two "K 58-6" back to back with "F2" screws and Install them in the position as shown. Install the other on the eff and right sides of the Shed Top Frame.
PRODUCT ASSEMBLY around the roof 2. Install at the highest part of the roof and "GE" at the front and rear 3.Install the comer's" on the four corners of the roof.
PRODUCT ASSEMBLY 13 Combine "W-K' and "W2-HL" fo make the door panel on the left.
PRODUCT ASSEMBLY View from the front. the vertical rod covers the horizontal rod. The larger heel is always covered over the small hole.
PRODUCT ASSEMBLY Before installation, please place the parts in the position as shown in the figure below.
PRODUCT ASSEMBLY View from the front, the vertical rod covers the horizontal rod. The larger hole is always covered over the small hole.
PRODUCT ASSEMBLY Install the latch "DC", hinge "DH" and door lock "GL" in the designated position as shown in the figure.
PRODUCT ASSEMBLY The exposed parts on upper beam "k58-6° shale be covered with plastic protective cover.
HELP CENTER Guest ion about your product? We're here to help. Visit us ok Chat Support Product Inquiry Orders FAR Product Assembly Re tums & Refunds if you have any issues with our inert please let us know! We will always do our best io come up with a solution that you will be happy with Please get In touch with our customer services team before returning the product And pls do not throw the original box{es} if you have not finished assembling or confirmed ne quality issues.