Owner's Manual

31
locations are marked with “SRS” logos. Be careful not to crimp or cut
the cable.
5. Bring the cable out from the trim near the front of the cabin and route
it under the carpet toward the dashboard or console. Coil any excess
cable in a hidden location, such as under the carpet, keeping it away
from any vehicle pedals or controls. Secure the excess cable with wire
ties (purchased separately).
6. Bring the end of the cable out at the PowerConnect Vehicle Dock
location. Leave yourself enough cable so you can easily connect it to
the antenna connector of the dock.
7. Continue with “Step 6: Connect the Magnetic Mount Antenna and
PowerConnect Power Adapter” on page 36.
Vehicle Installation