User Manual

pg. 19
Copyright © 2017- www.SingleTact.com
Figure 9 SingleTact and Arduino UNO Connection
To run the Windows GUI application:
 Open the PCExecutable folder.
 Run SingleTact Demo.exe to bring up the demonstration application.
Figure 10 Demo of PC DAQ software
The PC application can be used to change the sensor’s I
2
C address and to modify its output scaling.
For more information on these settings please refer to the I2C Interface section.
CONNECTION
No Connect
Arduino UNO pin A4
No Connect
Arduino UNO GND pin
1
4
3
2
8
5
6
7
CONNECTION
No Connect
Arduino UNO pin A5
No Connect
Arduino UNO 5V pin
PIN NUMBER
*Note: Reference Gain will automatically change depending on the sensor size.