Instruction Manual

CHANGING PRESSER FEET
Snap-on Presser Feet
Raise take-up fever to highest position by turning hand
wheel toward you, Raise presser foot by ra!sing pros _
ser foot lifter, }ocated at back of machine. Press front
of foot _Jt_as far as it will go_ then snap down to re-
move. Center new foot under shank Lower presser-foot
lifter so shank fits ever pin. Press presser_foot screw
down untii foot snaps in place
The Button Foot
Raise take-up lever to highest position by turnin 9 hand
wheel toward you. Raise foot. Loosen presser-foot
screw and remove presser-foot shank: Hook button
foot around the presser bar and tighten presser-foot
screw.
Even Feed FoOt
Raise take,up lever to highest position by turning hand
wheel toward you, Raise foot. Loosen presser foot
screw and remove presser foot shank Guide Even
Feed Foot into position from back of machine. Make
sure movable arm straddles needle clamp Tighten
presser-foot screw with coin.
Me
NeedJe
Clamp
Attaching Even Feed Foot