Congratulations! Dear Customer: Welcome to the our family. Thank you for purchasing one of our products. Our goal is to provide you with superior service. If there is anything missing from or wrong with your order, or if you have any questions about using our product, PLEASE contact us. Email: com Our team is available 24/7 to address your questions, comments, and concerns. Your satisfaction is our ultimate goal. We want to make everything right so you'll share your positive experience with other shoppers.
1 Q&A 1.How often do I need to clean my ice maker? Depending on how frequently you use it, it is recommended that you clean it at least once a week Failure to clean the machine will cause scale accumulation, which will eventually block the pump and cause the product to stop working properly. 2.How should I clean the machine? tis recommended to use lemon water or weak acid vinegar for cleaning.
01 Contents Important Safety Information Specifications General Information Explosive Drawing Operation And Maintenance Installation Location Requirements Electrical Requirements And Connections Water Connection For Your Ice Maker Operating Your Unit WIRING DIAGRAM Cleaning And Maintenance Troubleshooting Error Indicator Warranty 14-15 16-17 18-21 22 23 24
IMPORTANT SAFETY INFORMATION When using electrical appliances, basic safety precautions should be followed to reduce the risk of fire, electric shock, and injury to persons or property. Read all instructions before using any appliance, Use this appliance only for its intended purpose as described in this owner's manual. This ice maker must be properly installed in accordance with the installation instructions before iris used.
| IMPORTANT SAFETY INFORMATION s WARNING: Children should be supervised to ensure that they do not play with the appliance. WARNING: Do not store explosive substances, such as aerosol cans with a flammable propellant, in this appliance. DANGER: Risk of fire or explosion. Flammable refrigerant used. Do not use mechanical devices to defrost ice maker. Do not puncture refrigerant tubing, CAUTION: Risk of fire or explosion.
| SPECIFICATIONS 516 DIMENSIONS/ CONNECTIONS 380 FT 159 a8 880 [23.5] 828 [B23 Rating SKU POWER SUPPLY VOLTAGE Single-phase, Hz CLIMATE CLASS 10-40°C ELECTRICAL PROTECTION CLASS I ICE-MAKING RATING 2.6A ICE-HARVESTING RATING 3.04 ICE-MAKING CAPACITY 36kg/24hr. REFRIGERANT CHARGE R290 2.6502. /75¢ NET WEIGHT 53.50bs DESICCANT C5H10 UNIT DIMENSIONS 15" Wx 20.3" Dx 335° H MAX ICE STORAGE CAPACITY 241bs ACCESSORIES Scoop, installation kit, handle POWER CORD: BAWL CONNECTION WATER SUPPLY: 6.
| GENERAL INFORMATION 1.Main unit construction GOOIEST Eh 3800080008000 1.Door assembly, including ice-making evaporator, water tank, water pump, and some detecting parts 3.Door handle 4.Ice tank 5.Control panel & Hot-air vent 7 Water-drainage port: Normally, the port will be plugged with the cap. When the water needs to be drained, unplug the cap and connect the white drainpipe. 8 Water inlet port: Use to connect the water supply pipe.
| GENERAL INFORMATION A Water-dividing pipe: Water will flow through these 9 little holes. If no water flows out, this piece can be disassembled and cleaned. B Evaporator (ice-making module) Lee Full detecting board: Detects whether the inner compartment is full of ice and whether the ice-harvesting process is over. [Water tank E Water-supply pipe F.Cover board on the right side of the evaporator G.Water level switch installing plate H.
| EXPLOSIVE DRAWING 4, 5520 E23 Ng No.
| EXPLOSIVE DRAWING 18 | Fan fix cover plate Zinc-Plate sheetlike 1 19 | Plug + Power cord Electrical part AC115V 1 20 | Strain relief bushing PP black 1 21 | Fan Electrical part DC12V 120mm 2 22 | Fan Electrical part DC12V 90mm 1 23 | Air outlet panel SUS4308=08 1 24 | Left bottom hinge SPELLBIND 5mm Chrome Plated 1 [accessory] 25 | Right bottom hinge SPLOTCH 5mm Chrome Plated 1 26 | Adjusted foot ME*3 0mm 4 27 | Bottom plate Zing-Plate sheetlike 1 28 | Drain tube on liner Silicone tube, FDA 1 29 | Water d
| OPERATION AND MAINTENANCE Unpacking your ice maker 1.Remove the exterior and interior packaging. Check that all the accessories, including instruction manual, ice scoop, white water-inlet pipe, 4 ways to 2 ways water quick connector, and water-drain age pipe are inside. If any parts are missing, please contact our customer service. 2 Remove the tape from the door, inner compartment, lee scoop, ete. Quickly clean the Inner cabinet and ice scoop with a wet cloth.
| OPERATION AND MAINTENANCE 1 Ensure the unit is unplugged before starting door reversal. 2 Unscrew and remove the 2 screws from the top cover. Remove the top cover. 3.Unscrew and remove the 2 screws from the top hinge and 2 screws from the fix plate. Remove both parts. 4 Lift the door up and remove it. 5 8et the freezer door on a non-scratching surface with the outside up. 6.Unscrew the 2 screws on the handle. Fix on the opposite side of the door. Remove the screw on the right-fix piece.
| INSTALLATION LOCATION REQUIREMENTS a) This unit is not for outdoor use. Keep the proper room temperature and water temperature according to the above specifications table. Otherwise, ice-making performance will be adversely affected. Bb) This unit should not be located near any heat source, ©) The unit should be located on a flat, level, stable surface at normal height d)There must be at least 2 in. clearance at the rear for the power connection and 5 in.
| ELECTRICAL REQUIREMENTS AND CONNECTIONS WARNING: This unit must be grounded. ELECTRICAL SHOCK HAZARD Plug this appliance into a grounded wall outlet Ever remove the ground prong. Use a dedicated power supply or receptacle for this appliance. Ever use an adapter. Never use an extension cord, Failure to follow these instructions can result in death, fire,or electrical shock. Before you move your ice maker to its final location, it is important to be sure vou have the proper electrical connection.
| WATER CONNECTION FOR YOUR ICE MAKER Important: Be sure to use the new hose sets included with the appliance to connect to your water supply. Do not reuse old hose sets. CONNECT THE WATER SUPPLYING HOSE TO THE UNIT Step 1: Remove the tape on the water-inlet port for the water supply (“B” in the following illustration] located at the unit back. Then use the finger of your other hand to press the out circle.
| OPERATING YOUR UNIT Operation-button and display-area diagram ope Ration | BELAY immersion SEA | fre Ari Ten) TIE | El OPERATION-BUTTON AND DISPLAY-AREA DIAGRAM | 0 i ORC 1 Starting up: Plug in the power plug. The {symbol will flash in the display window. Press the ON/OFF button on the control panel. The machine will start to make ice when the water fills to the standard level in the water tank. Then, the(}j symbol will change to a steady light in the display window, and the, symbol will rotate.
| OPERATING YOUR UNIT &. TIME SETTING RANGE: 1-24 HOURS Time shutdown: When the unit is running, it can set up the timing shutdown. Time on: When the unit is on standby, you can set the unit with ON-TIMER. HOW TO SET UF THE TIMER Press the “TIMER” button. The def alt timer time is “TH” in the display window. Then, press the “ +” and buttons to increase or decrease the timer in 1-hour increments. During the process of time adjustment, the "H” will flash.
| WIRING DIAGRAM ELECTRICAL DIAGRAM! Start Relay ¥ Relay nid Val fai BGwWalecineiVale SINISTER LEVEL DETECTING SWITCH SENSORY AMENDMENT TEEN -SURGERY FOR LE FULL DETECTING 6 NORMAL SOUNDS Your new ice maker may make unfamiliar sounds. Most of these sounds are normal. Hard surfaces such as the floor, walls, and cabinets can make the sounds seem louder. The following describes the kinds of sounds that might be new to you and what may be making them.
| WIRING DIAGRAM Preparing the Ice Maker for Long Storage If the ice maker will not be used for a long time, moved to another place, it will be necessary to drain out all of the water in the system. 1.Be sure all the ice cubes have been ejected from the evaporator of ice maker. 2. Turn off the unit and unplug the power cord. 3 Shut off the water at the main water supply. 4 Disconnect the water-supply hose from the water-inlet valve. 5.
| CLEANING AND MAINTENANCE A WARNING: * Before carrying out any cleaning or maintenance operations, unplug the ice maker from the power outlet. (EXCEPTION: Ice maker self cleaning program] * Do not use any alcohol or gas for pedestrianization of the ice maker. These chemicals may cause cracks on the plastic parts. * Ask a trained service person to check and clean the condenser at least once a year to help the unit work properly. * This appliance must be cleaned by use of a water jet.
| CLEANING AND MAINTENANCE Interior Cleaning For Ice Storage Bin The ice storage bin should be sanitized occasionally. Clean the bin before the ice maker is used for the first time and reused after stopping for an extended period of time. Iris usually convenient to sanitize the bin after the ice-making system has been cleaned and the storage bin is empty. 1 Disconnect power from the unit. 2.
| CLEANING AND MAINTENANCE Suggestion: After cleaning and reinstalling the interior parts and resuming use of the ice maker, discard the first batch of ice. Ice-Making Assembly System Cleaning With Nu-Glucagon Nickel-Safe Ice Machine Cleaner Minerals removed from the water during the freezing cycle will eventually form a hard, scaly deposit in the water system. Cleaning the system regularly helps remove the mineral scale buildup.
| CLEANING AND MAINTENANCE DO NOT use solvents or abrasives on the interior. These cleaning agents may transmit a chemical taste to the ice cubes, or damage or discolor the interior. 8.0pen the faucet of the main water supply and let water flow into the unit. Again, press and hold the “TIMER CLEAN” button on the control panel for more than 5 seconds to enter the self-cleaning program. As explained previously, the water pump runs for 8 minutes and stops for 3 minutes. one cycle, again one cycle.
| TROUBLESHOOTING PROBLEM POSSIBLE CAUSE SOLUTION ” indicator water supply + Check the main water supply pressure, increasing the water pressure as needed. Check the water-supply hose for blockages, cleaning the hose necessary. = Floating ballot the water level-detecting switch is blocked and cannot rise Clean the water tank and the water level-detecting switch. + Water flows out from the water tank Place the unit on a level surface, not on a slope.
| ERROR INDICATOR Abel = ambient temperature sensor auk BIZ = no ice production or gas leak E = drain pump dose not work magnetic control switch cutoff “Full” light will be on when plugging in or turning on the unit. It will delete the breakdown display if this switch is electric-shorted. d) During the ice-making process, press and hold the “ON/OFF” button for more than 5 seconds. The unit will enter the ice-harvesting program, After harvesting ice, the system will enter the lice-making process.
| WARRANTY Euphony offers a limited 1-year warranty (* warranty period” } on all of our products purchased new and unused from Euphony company, with an original proof of purchase and where a defect has arisen, wholly or substantially, as a result of faulty manufacture, parts or workmanship during the warranty torpedo.
