SIMP HOME I ® I L I F E B Y D E S I GN KITCHENER / WATERLOO / PROVIDENCE CONSOLE / SOFA TABLE MODEL # AXCKIT06-WH 1/13
SIMP HOME I I ® L I F E B Y D E S I GN Questions, problems, assembly help, missing parts? No need to return the product, we will gladly help and ship your replacement parts free of charge Please call Customer Service at 1-866-518-0120 ext. 262 Monday to Friday between 9 am – 4 pm EST or go to www.simpli-home.
IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. SAFETY INFORMATION Identify all the parts and hardware. Do not discard of the packaging until you have checked that you have all of the parts and hardware required. Hardware package may have spare parts. WARNING: This item contains small parts which can be swallowed by children and pets. Keep children and pets away during assembly.
IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. CARE and MAINTENANCE Perhaps the greatest environmental damage to wood furniture comes from wide swings in relative humidity (RH) in our homes. Wood absorbs and desorbs water as relative humidity rises and falls, and in doing so it swells and shrinks. Making matters worse, it expands and contracts unequally along different grain directions.
PRE-ASSEMBLY INFORMATION MODEL # AXCKIT06-WH PARTS DESCRIPTION A BL Fro nt / Ava nt Avant Front / BR Front / Avan t Front / Avan t Avant Front / TOP QTY 1 LEFT SIDE QTY 1 D E UpSide/Vertical C RIGHT SIDE QTY 1 UpSide/Vertical Fro nt / Ava nt BACK PANEL QTY 1 F G FRONT BAR QTY 1 HL DRAWER FRONT QTY 2 I HR RIGHT DRAWER SIDE QTY 2 DIVIDER QTY 1 BOTTOM SHELF QTY 1 LEFT DRAWER SIDE QTY 2 J DRAWER BACK QTY 2 DRAWER BOTTOM QTY 2 NEED HELP? For help with assembly or if you are miss
PRE-ASSEMBLY INFORMATION MODEL # AXCKIT06-WH HARDWARE DESCRIPTION 1 2 ALLEN KEY SCREW M6 X 30 mm QTY 15 4 3 CAM LOCK PIN CAM LOCK QTY 14 SETS ALLEN KEY QTY 1 5 HANDLE M4 X 25 mm QTY 2 SETS WOOD DOWEL Ø8 X 30 mm QTY 18 Required Flathead screwdriver Phillips screwdriver Rubber mallet Not Included NEED HELP? For help with assembly or if you are missing a part, Please call customer service at 1-866-518-0120 ext.
COMPONENTS – KEY DIAGRAM Fron t/A vant C Fron t/A vant Fron t/A vant E UpSide/Vertical A MODEL # AXCKIT06-WH Fron t/A vant F BR BL D HR I HL J G 7/13
ASSEMBLY MODEL # AXCKIT06-WH STEP 1 HR HL G 2 1. Attach 4 Cam Lock Pins 2 to back of Drawer Front G . 2. Align Cam Lock Pins with guide holes and attach Drawer Sides HL , HR . 3. Insert 2 Cam Lock 2 into guide holes on each Drawer Side HL , HR . 4. Use flathead screwdriver to secure Cam Locks. STEP 2 HR J HL G 1. Slide Drawer Bottom J firmly into slots on Drawer Sides HL , HR and Drawer Front G .
ASSEMBLY MODEL # AXCKIT06-WH STEP 3 I HR J 1 3 G HL 1. Align Drawer Back I with Drawer Bottom J and press firmly into slot . 2. Attach back using 2 Allen Key Screws 1 through guide holes on each side. 3. Use Allen key 3 to tighten. Do not over-tighten. STEP 4 4 NOTE: The screwdriver is not included in the hardware pack. G 1. Use Phillips Screwdriver to attach Handle 4 to Drawer Front G . Repeat Step 1-4 for the second drawer.
ASSEMBLY MODEL # AXCKIT06-WH STEP 5 BR e UpSid cal /Verti 5 Fron t/A vant D C F rtical e/Ve UpSid 5 2 BL 1. Insert 4 wood Dowel 5 into of each Back Panel C , Front Bar F and Bottom Shelf D . 2. Use rubber mallet to tap Dowels 5 into bottom of holes securely. 1/2 length of Dowels should be exposed. 3. Attach 3 Cam Lock Pins 2 to into each Side BL , BR . 4. Align wood Dowel 5 on C , F , D with guide holes of Side BL , BR . 5. Align Cam Lock Pins with guide holes and attach Bottom Shelf D . 6.
ASSEMBLY MODEL # AXCKIT06-WH STEP 6 5 1 3 E Fron t/A vant UpSide/Vertical C Fron t/A vant Fron t/A vant BR F BL D 1. Insert 2 Dowels 5 into Divider E . 2. Use rubber mallet to tap Dowels 5 into bottom of holes securely. 1/2 length of Dowels should be exposed. 3. Align Wood Dowels 5 on Divider E with guide holes on Back panel C . 4. Use Allen Key Screw 1 attach Front bar F to Divider E . 5. Use Allen key 3 to tighten Allenkey Screw. Do not over-tighten .
ASSEMBLY MODEL # AXCKIT06-WH 5 STEP 7 E Front / Avant BL A Front / Avant D 3 1 BR 1 3 1. Insert 2 Dowels 5 into top corners of each Side BL , BR . 2. Use rubber mallet to tap Dowels 5 into bottom of holes securely. 1/2 length of Dowels should be exposed. 3. Align guide holes on bottom corners of Top A with Dowels 5 in Sides BL , BR . 4. Use Allen Key Screw 1 attach Top A to Sides BL , BR and to Divider E . 5. Use Allen key 3 to tighten Allen key Screw. Do not over-tighten . STEP 8 1.
SIMP HOME I I ® L I F E B Y D E S I GN WARRANTY Thank you for purchasing a Simpli Home – Wyndenhall – Brooklyn + Max product. These products have been made to demanding, high-quality standards and are guaranteed for domestic use against manufacturing faults for a period of 12 months from the date of purchase. This warranty does not affect your statutory rights. In case of any malfunction of your product (failure, missing parts, etc.
