ACADIAN / NORMANDY / BRUNSWICK SINGLE DOOR WALL CABINET MODEL # AXCBCACA-03 1/11
/11
/11
PRE-ASSEMBLY INFORMATION CABINET TOP QTY 1 MODEL # AXCBCACA-03 LEFT SIDE PANEL QTY 1 RIGHT SIDE PANEL QTY 1 BOTTOM PANEL QTY 1 SHELF QTY 1 MIDDLE SHELF QTY 1 BOTTOM BACK PANEL QTY 1 TOP BACK PANEL QTY 1 DOOR QTY 1 REAR TOP CROSS BAR QTY 1 REAR BOTTOM CROSS BAR QTY 1 4/11
COMPONENTS-KEY DIAGRAM MODEL # AXCBCACA-03 A K J H C E F B I G D 6/11
ASSEMBLY MODEL # AXCBCACA-03 STEP 1 6 2 5 8 7 A I B 5 9 Assembling the Cabinet Top, Door 1. Lay down the cabinet top (A) and screw four cam bolts (2) into the pre-drilled holes using a Phillips screwdriver. 2. Attach the magnet (8) to the left side panel (B), by inserting two screws (6) through the holes on the magnet (8). Use a Phillips screwdriver to tighten. 3.
15 15 3. Cover the cam locks with caps (15) on left side panel (B) and right side panel (C).
ASSEMBLY MODEL # AXCBCACA-03 STEP 5 5 11 7 12 C I Assembling the Door 1. Attach the door (I) to the right side panel (C) by inserting four screws (5) through the holes on the door hinges and tighten. 2. Attach the handle(11) to the door (I) and insert one screw (12) through hole on the door and tighten to handle (11) using a Phillips screwdriver. STEP 6 J 10 K 13 14 Assembling the Rear Bottom Cross Bar and Adjustable Shelf 1. 2. 3. 4. 5. Drill two holes in the wall where marked.
/11
/11
