Specifications

MANUAL LSM – UPDATE BASIC
Page 8
4.0 UPDATING LOCKING SYSTEM MANAGEMENT BASIC
4.1. GENERAL
Following the steps below enables you to update your installation to an LSM Basic
installation. Technically, you will be updating the LSM GUI and changing the
database structure. The Advantage Database Server does not have to be set up
because this component is not used in an LSM Basic installation. When upgrading
the LDB to LSM Basic, the existing data file (*.ls) must be imported into a new
database.
4.1.1 INSTALLING LOCKING SYSTEM MANAGEMENT
PROCEDURE
• Install the software (see the following process)
• Install Crystal Reports bugfix
• Start the software after installation
• Register the software
• Set up the database connection
INSTALLING SOFTWARE
• The contents of the software DVD are displayed in the browser when it is
inserted
• You will find a direct link to the setup routine in the software area
Alternatively, you can also invoke installation directly
[CDROM]:\Software\ LSM3x_BASIC\[language]\lsm_setup_basic_3_x_xx.exe
• Start installation
• Perform the individual steps
Confirm by clicking on
Next to start installation
Version: May 2011