Service Manual

SRM9000 SERIES SERVICE MANUAL

4.2.2 Radio Preparation

Radio parameters are to be aligned sequentially as detailed in this procedure.

1. At the Opening Menu, select the Align Menu

and choose Prepare/Read Radio.

2. The WARNING is displayed.

Choose No if you want to save the

configuration and use the FPP software to

read and save the data to a file.

Choose Yes if you want to proceed and go to

step 3.

3. The radio alignment data is read (indicated

by percentage bar) and stored.

The test alignment data is downloaded into

the radio.

Note: In test alignment mode the radio is configured only for 12.5 kHz channel spacing, therefore all

alignment is carried out at 12.5 kHz settings unless otherwise specified. When the radio is

configured with the FPP for other channel spacings, the deviation related levels are calculated on

a per channel basis by the radio software.