Owner`s manual

MOON P-5 Dual-Mono Preamplifier
Specifications
Configuration ........................................... Dual Mono
Power Supply Transformer ........................ 0.5kVA
Power Supply Capacitance ........................ 70,000µF
Class Of Operation ................................... Class “A”
Design ..................................................... Open Loop – Fully Balanced Differential
Balanced inputs (XLR) .............................. 1
Single-ended inputs (RCA) ........................ 5
Input Device Type ................................... J-FETs
Input Impedance ..................................... 47,500
Ω
Input Sensitivity ...................................... 200mV – 4.0V RMS
Tape Output ............................................ 1
Output Device Type ................................. MOSFET
Balanced outputs (XLR) ............................ 1
Single-ended outputs (RCA) ..................... 1
Output Impedance (Balanced) ................. 110
Ω
Output Impedance (Single-ended) ........... 220
Ω
Gain Control ............................................ RGB ry – Fully Discrete “Shunt-To-Ground”
Gain (Balanced) ...................................... 12dB
Gain (Single-Ended) ................................ 9dB
Signal-to-noise Ratio ................................ 98dB @ full output
Maximum Output Voltage (Balanced) ......... 10 Volts
Maximum Output Voltage (Single-Ended) ... 5 Volts
Frequency Response ................................ 20Hz - 20kHz +0/-0.1dB
Crosstalk @ 1kHz ..................................... -65dB
Intermodulation Distortion ....................... Unmeasureable
THD (20Hz - 20kHz) ............................... < 0.05%
Remote Control ....................................... All Aluminum Full-Function (FRM)
Optional Phono Section ............................. MOON PSP - external
AC Power Requirements ........................... 120V / 60Hz or 240V / 50Hz
Fuse Replacement - 120V / 230V .............. 2A long slow blow / 1A long slow blow
Shipping Weight ...................................... 40 lbs / 18 Kgs
Dimensions (W x H x D, inches) ................ 17 x 4 x 15 (each chassis)
Balanced Input and Output Pin Assignment:
Pin 1 ........................ Ground
Pin 2 ........................ Positive
Pin 3 ....................... Negative
____________________________________________________________________________________
Specifications 13