D35 DLP™ VIDEO PROJECTOR RS-232C CONTROL SPECIFICATIONS Document Revision 1.
SIM2 D35 RS-232C CONTROL SPECIFICATIONS Table of Contents 1. INTRODUCTION 3 2. CONNECTION 3 3. COMMUNICATION PROTOCOL 4 HEADER PAYLOAD 4 4 4. COMMANDS 5 REMOTE CONTROL KEYCODES OPERATION CODES 5 7 5. EXAMPLES 9 6. WARNINGS 9 Revision History: Revision 1.0 Date 20 April 2004 Software Version 2.48.55 F or higher 2 Description of Change Initial version.
SIM2 D35 RS-232C CONTROL SPECIFICATIONS 1. Introduction This document describes the communication and data formats used to control SIM2 D35 projector via RS232C port. 2. Connection Switch off your Personal Computer and Projector before connecting RS 232C cable. Use a standard serial cable with 9 pin female to the Personal Computer and 9 pin male to the Projector: pin 2 connects to pin2, pin 3 to pin 3 and pin 5 to pin 5. SIM2 D35 Port is described as follows.
SIM2 D35 RS-232C CONTROL SPECIFICATIONS 3. Communication Protocol The communication protocol is packet oriented. Packets consists of Header and Payload. There are two types of packets: Event and Operation. The packet header size is fixed (7 bytes), while the packet payload type and content varies based on the type of packet: Event payload size is 6 bytes, while Operation payload size is 25 bytes.
SIM2 D35 RS-232C CONTROL SPECIFICATIONS 4. Commands Remote Control Keycodes The following commands send simulated Remote Control input to SIM2 D35 projector.
SIM2 D35 RS-232C CONTROL SPECIFICATIONS Direct access codes Goto Brightness BE EF 02 06 00 C7 E1 7E 01 00 00 00 00 Goto Contrast BE EF 02 06 00 16 E0 7F 01 00 00 00 00 Goto Color BE EF 02 06 00 19 F4 80 01 00 00 00 00 Goto Tint BE EF 02 06 00 C8 F5 81 01 00 00 00 00 (1) When the unit is in Stand-by state, this command switches on the unit and the last source memorised prior to switch off is automatically selected.
SIM2 D35 RS-232C CONTROL SPECIFICATIONS Operation Codes The following codes provide direct access to SIM2 D35 User Interface operations not accessible via a single Remote Control command.
SIM2 D35 RS-232C CONTROL SPECIFICATIONS SET FILM GAMMA SET VIDEO SET GRAPHICS INCREMENT FREQUENCY DECREMENT INCREMENT PHASE DECREMENT INCREMENT Y/C DELAY DECREMENT INCREMENT MAGNIFICATION DECREMENT INCREMENT PAN HORIZONTAL DECREMENT INCREMENT PAN VERTICAL DECREMENT KEYSTONE VERTICAL KEYSTONE HORIZONTAL INCREMENT DECREMENT INCREMENT DECREMENT SET ENGLISH SET ITALIANO SET FRANCAIS LANGUAGE SET DEUTSCH SET ESPANOL SET PORTUGUES OSD POSITION HORIZONTAL OSD POSITION VERTICAL INCREMENT DECREMENT INCREMEN
SIM2 D35 RS-232C CONTROL SPECIFICATIONS SET YCrCb AutoSync SET YCrCb 15kHz INPUT 3 (COMP.
