Crystal Chandelier Model No.
Please contact us in following format: 1. Order platform name and Order ID NO. 2. Problem details with picture / video if possible Email: homechandelier@qq.com 1 Email: homechandelier@qq.
Safety Rules WARNING: BE SURE THE ELECTRICITY TO THE WIRES YOU ARE WORKING ON IS SHUT OFF; EITHER THE FUSE IS REMOVED OR THE CIRCUIT BREAKER IS TURNED OFF. TURNING THE POWER OFF USING THE LIGHT SWITCH IS NOT SUFFICIENT TO PREVENT ELECTRICAL SHOCK. NOTE: The important safeguards and instructions appearing in this manual are not meant to cover all possible conditions or situations that may occur. It must be understood that common sense, caution, and care, are factors which cannot be built into any product.
LIGHT BULBS REQUIRED This fixture uses E12 bulb base, works with incandescent, LED, CFL, halogen or color changing bulbs up to 40W. Fully dimmable when used with dimmable bulbs and a compatible dimmer switch (not included). BULBS ARE NOT INCLUDED IN THIS ITEM. Please purchase the right bulbs you need. 1.
2. Mounting & Wiring Plastic Anchor ① Wire Connector ② Fixture Wire ③ Mounting Bracket ④ Machine Screw ⑤ Wood Screw ⑥ Canopy ⑦ Bolt Cap ⑧ NOTE: Please test the fixture before installation to ensure it is working properly. 1. Turn off power at circuit box to avoid possible electric shock. 2. Place mounting bracket ④ on ceiling and mark out the points where you would like to drill holes. 3. Drill holes on the ceiling and insert plastic anchors ①. 4.
3. Fixture Assembly 1. Install the lamp arm ⑥ on the lamp box cover ④ and fix it with a nut ⑤. 2. Pass the main wire ① through the ceiling plate ② and the center rod ③ to the bottom of lamp box cover ④. 3. Connect fixture wires to house wires using wire connector ⑦, black/ brown fixture wire to live wire, white/blue fixture wire to neutral wire, yellow & green wire to your ground wire (optional). 4. Fix the lamp with the decorate nut ⑨. 5 Email: homechandelier@qq.
Trouble Shooting 1. Missing/Broken Parts · Make a list of the missing/broken parts according to the packing list, take photos for broken parts, then email us for free replacements. 2. Bulbs Do Not Light Up · Check your power and switch to make sure it's power on. · Check the bulb to make sure it's installed correctly. · Change a new bulb. · Check the wires to make sure they are connected correctly. 3. Bulbs Flicker/Noisy Operation · Check the bulb to make sure it's installed correctly. · Change a new bulb.
"We followed the light to a brighter and warmer place.
