User Manual

61
Copying Network Profiles to the Camera / Infrastructure Networks
Operating the WT-4 for Computer
A The “Select Action” Dialog
The other options in the “Select Action” dialog are described below. Note
that the camera need not be connected to a computer to choose a printer
or change the upload folder.
• Change password: The dialog shown at
right will be displayed. By default, no
password is required to change
device profiles using the WT-4 Setup
Utility. A password can be added by
selecting Change password. If the
camera is later connected to a
different computer, a password
prompt will be displayed. Once the
correct password has been entered,
the prompt will not be displayed
again. To change an existing
password, enter the old password
before typing the new password. To remove the password, select Reset
password (profiles will be lost) and click Next. Please note that resetting
the password deletes all existing device profiles from the camera. Click
[Back] to exit without changing password settings.
• Setup wireless printer: By default, the system default printer for the host
computer will be used when printing pictures. To choose a different
printer, select Setup wireless printer (pg.97).
• Setup picture folder: The dialog shown
at right will be displayed. This screen
allows you to select the destination
folder when downloading images to
your computer in transfer mode.
Click the […] button to display a
folder list from your computer, then
select a destination folder. Changing
the destination folder does not
require you to connect the camera to
your computer. The default
destination is the [WT-4] folder in
[Pictures] (Windows Vista/Mac OS X)
or [My Pictures] (Windows XP).
• Show it with ViewNX: When the [Show it with ViewNX] option is toggled
on, after connection with WT-4 is terminated, ViewNX will launch and
downloaded images are displayed. If ViewNX has not been installed,
[Display in ViewNX] cannot be selected.
$00_WT-4_En.book Page 61 Friday, August 10, 2007 2:02 PM