User manual

ImPorTANT SAfEGUArDS
rEAD ALL INSTrUCTIoNS BEforE oPErATING
CAUTIoN
• For use with Makita Li-Ion Battery only.
Compatible models: BL-1430, BL-1440, BL-1450, BL-1830, BL-1840, BL-1850
• Do not use in a high temperature environment.
• Do not wet.
• Do not short circuit.
• Disconnect the adapter with battery while stop charging.
fEATUrES
• No built-in battery, powered by tool battery.
• Low standby power consumption, energy saving.
• Device connection auto detection.
• Multiple protections.
TECHNICAL INformATIoN
Input Voltage 12.8 ~ 22 VDC
Max. Input Current 1 A
Output 5 V / 2 A
Open Circuit Voltage 5.05 V ± 0.05 V
Frequency 150 kHz
Standby power consumption < 50 µ A (MCU Standby)
Auto Standby Standby after 15 s disconnection.
Auto Activation Auto activated while connection being detected.
Protection 1. Low input voltage protection: input cut off @ 12.5 V ± 0.3 V
2. Over output voltage protection: output cut off @ ≥ 5.5 V
3. Short circuit protection: Cut off when short circuited.
LED Indicator - Non load: Red on 15 s and off (Disconnected)
- Connected: Red on
- Disconnected: Red on 15 s
- Low input voltage: Red ashes 5 times @ 1 Hz and off.
- Over output voltage: Red ashes @ 3 Hz
- Short circuit: Red ashes @ 3 Hz
Weight 67g (Without packing)
Working Environment - Temperature: 0 – 40 °C
- Humidity: ≥ 85 %
- Air pressure: 86 Kpa – 106 Kpa
Storage Environment - Temperature: - 20 °C – 65 °C
- Humidity: ≥ 90 %
- Air pressure: 70 – 106 Kpa
SPECIfICATIoNS
GB/USA