Installation Guide

Ready-Mix Repair

How-To-Use

Materials:

• Safety glasses and gloves

• 1 quart tub of Sikacryl Stucco Patch

• Small trowel or ﬂexible putty knife

• Wire brush

• Water & clean rag for clean up

Procedure

1. Make sure that all surfaces are clean, sound, dry and free

from dirt and loose particles.

2. For best results, use a wire brush to clean o any loose

particles or excess dirt or dust.

3. Use a small trowel or ﬂexible putty knife to apply product to

stucco surface.

4. Areas greater than 1/4 inch deep may require two or more

applications.

5. Allow repaired area to cure for at least 1 hour

minimum, depending on temperature, humidity and depth

of repair. Full cure will be achieved in 72 hours.

6. Prime area prior to painting.

7. Clean up all tools, spills, and excess material immediately

with water and clean rag after use.

Sikacryl

Stucco Patch

PAGE 1
How-To-Use Sikacryl® Stucco Patch Materials: Ready-Mix Repair • Safety glasses and gloves • 1 quart tub of Sikacryl Stucco Patch • Small trowel or flexible putty knife • Wire brush • Water & clean rag for clean up Procedure 1. Make sure that all surfaces are clean, sound, dry and free from dirt and loose particles. 2. For best results, use a wire brush to clean off any loose particles or excess dirt or dust. 3. Use a small trowel or flexible putty knife to apply product to stucco surface. 4.