TDS

Product Data Sheet
Sika® AnchorFix-2
February 2020, Version 01.04
020205010020000001
PRODUCT DATA SHEET
Sika® AnchorFix-2
SUPER STRENGTH, TWO COMPONENT ADHESIVE ANCHORING SYSTEM
PRODUCT DESCRIPTION
Sika® AnchorFix-2 adhesive anchor system is
solvent/styrene free, epoxy acrylate based, and has
been specifically formulated as a high performance, two
component adhesive anchor system for threaded bars in
uncracked concrete.
USES
Sika® AnchorFix-2 may only be used by experienced
professionals.
As a fast curing anchoring adhesive for all grades of:
Rebars / reinforcing steel
Threaded rods
Bolts and special fastening systems
In the following substrates:
Concrete
Solid masonry
Steel
Hard natural stone
*
Solid rock
*
* These substrates may vary greatly, in particular with regard to strength,
composition and porosity. Therefore, for each application the suitability of Sika®
AnchorFix-2 Adhesive must be tested by first applying the Product only to a
sample area. Check in particular bond strength, surface staining and
discoloration.
CHARACTERISTICS / ADVANTAGES
Fast curing
Standard guns can be used
High load capacity
Drinking Water certified
Non-sag, even overhead
Styrene-free epoxy acrylate
Low wastage
Fixing close to free edges.
Versatile range of embedment depths.
Anchoring without expansion forces.
APPROVALS / STANDARDS
EESR to AC308 by ICC-ES PENDING.
ESR to AC308 by IAPMO-UES.
Certified to ANSI / NSF - 61 by UL.
PRODUCT INFORMATION
Packaging
10 fl.oz. (299 ml) cartridge
Shelf Life
12 months from date of production
All Sika® AnchorFix-2 cartridges have the expiry date printed on the label.
Storage Conditions
Cartridges should be stored in their original packaging, the correct way up, in
cool conditions 41 °F to 77 °F (5 °C to 25 °C) out of direct sunlight.
1 /
8

Summary of content (8 pages)