Use and Care Manual

Table Of Contents

ASSEMBLY INSTRUCTIONS

Style#2050-C Chair

●

NOTE TOCUSTOMERS:

For ease and speed of assembly we recommend that before you commence each step of

the assembly that you identify all the parts required to complete that step.

We recommend that where possible you allow sufficient space to assemble the item as

close as possible to the place where it will be once assembled.

For the protection of your furniture we recommend that the product is placed on protected

surfaces during assembly to prevent any damage.

During assembly do not over tighten,as this may damage the product.

Please ensure you retain all the product packaging until the item completely assembled.

Please periodically check all fittings and re-tighten as necessary.

It is recommended that this item should be assembled by two adults.

Page 1 of 3

PAGE 1
ASSEMBLY INSTRUCTIONS Style#2050-C Chair NOTE TOCUSTOMERS: ● ● ● ● ● ● ● For ease and speed of assembly we recommend that before you commence each step of the assembly that you identify all the parts required to complete that step. We recommend that where possible you allow sufficient space to assemble the item as close as possible to the place where it will be once assembled.
PAGE 2
Part List A1. Quantity of 1 Seat A2. Quantity of 1 Backrest Quantity of 4 A4. Leg 5 16 x75mm Bolt A6. M8 Allen Wrench STEP 1 A4 A5 A6 A1 Attach Legs A4 to the bottom of Seat A1 using Bolts A5 as shown above. Page 2 of 3 Quantity of 1 Back Cushion Quantity of 4 A5. A3.
PAGE 3
STEP 2 A2 A1 Insert Backrest A2 into the glides on both sides of arm as shown above. STEP 3 A3 A2 Attach Back Cushion A3 on the front of Back A2 as shown above.