Installation Sheet

ManualsBrandsSignature Hardware ManualsShop All Signature HardwareSignature Hardware Tolovana Floor Mounted Tub Filler Faucet - Includes Hand Shower

1Tolovana Freestanding Tub Faucet Installation Instructions

TOLOVANA FREESTANDING FAUCET INSTALLATION

GETTING STARTED

TOOLS AND MATERIALS:

BEFORE YOU BEGIN

We recommend consulting a professional if you are

unfamiliar with installing plumbing ﬁxtures. Signa-

ture Hardware accepts no liability for any damage

to the plumbing, ﬂoor, walls, tub, or personal injury

during installation.

Observe all local plumbing and building codes.

Unpack and inspect the item for shipping damage.

If any damage is found, contact our Customer

Relations team at 1-866-855-2284.

Ensure that you have gathered all of the required

materials that are needed for the installation.

Plumber’s Tape

For the following instructions, it is assumed that

the in-ﬂoor plumbing is already in place.

Thread Sealant

Screwdriver

Adjustable

Wrench

Hex Wrench

SKU(s): 938573

Summary of content (6 pages)

PAGE 1
SKU(s): 938573 TOLOVANA FREESTANDING FAUCET INSTALLATION BEFORE YOU BEGIN TOOLS AND MATERIALS: We recommend consulting a professional if you are unfamiliar with installing plumbing ﬁxtures. Signature Hardware accepts no liability for any damage to the plumbing, ﬂoor, walls, tub, or personal injury during installation. Plumber’s Tape Thread Sealant Hex Wrench Observe all local plumbing and building codes. Unpack and inspect the item for shipping damage.
PAGE 2
TOLOVANA FREESTANDING FAUCET INSTALLATION INSTALLATION 1. Attach the ½" copper supply tubes to the prepared water source at the ﬂoor. Apply thread sealant or plumber’s tape to the threads before connecting. 2. Slide the mounting brackets over the copper supply tubes, but do not yet attach to the ﬂoor. Note: If a ¾" connection is needed, use the provided adapters for your installation.
PAGE 3
TOLOVANA FREESTANDING FAUCET INSTALLATION 3. Slide the decorative riser tubes over the copper supply tubes and hand tighten them into the mounting brackets. The side of the tubes containing the longer threading should face down. Slide the decorative escutcheons onto the riser pipes, but do not yet slide them to the ﬂoor. If you ﬁnd that it is diﬃcult to slide the escutcheons onto the riser tubes, it may be necessary to lubricate with soap and water. 4.
PAGE 4
TOLOVANA FREESTANDING FAUCET INSTALLATION 5. With the assisstance of another person, slide the ½" lock nuts onto the copper supply tubes and hold them in place. Be careful not to drop the lock nuts down into the riser tubes. Then, slide the rubber cone washers onto the supply tubes with the tapered end facing up, as shown. 6. Secure the faucet body to the copper supply tube by threading the lock nut into the adapters. Apply a bit of thread sealant or plumber’s tape to the threads before attaching.
PAGE 5
TOLOVANA FREESTANDING FAUCET INSTALLATION 7. Push the faucet body down onto the copper supply tubes until it meets the decorative riser pipes. Hand tighten the riser tubes onto the faucet body, alternating between left and right tubes until secure. 8. Secure the faucet to the ﬂoor using the provided hardware and mounting brackets. Once secured to the ﬂoor, slide the decorative escutcheons to the base of the faucet to disguise the mounting hardware.
PAGE 6
TOLOVANA FREESTANDING FAUCET INSTALLATION 9. Complete the installation by attaching the hand shower to the faucet body using the provided ﬂexible hose. Set the hand shower into it’s cradle. 10. Once the installation is complete, turn on the main water supply. Turn the faucet on and allow it to ﬂow for 60 seconds. Check for any leaks, and that the hot and cold supplies are working correctly. Divert the water to the hand shower and allow the water to ﬂow through the hose for approximately 60 seconds.