Installation Sheet

2Dummy, Passage and Privacy Set Installation Instructions

INSTRUCTIONS

For the following installation instructions it is

assumed that any holes for the handle and lock

set have been pre-drilled.

Unpack and inspect the product for any shipping

damages. If you ﬁnd damages, do not install.

Contact Customer Service at 1.866.855.2284. If

you need assistance or have questions while

installing your door handle and plate set,

contact Customer Service.

We recommend consulting a professional if you

are unfamiliar with installing hardware ﬁxtures.

Signature Hardware accepts no liability for any

damage to the handle, lock set, or door, or for

personal injury during installation.

Note: Knob Sets may include extra screws or

other hardware.

TOOLS AND MATERIALS:

Before you begin, read the installation

instructions below. Observe all local building

and safety codes.

BEFORE INSTALLING DUMMY SET INSTALLATION

1. Place the dummy spindle (A) on the door in the door

knob location.

2. Use the dummy spindle as a template to mark and drill

pilot holes for the mounting hardware.

3. Secure the spindle (A) to the door with wood screws

provided (B).

4. Thread the decorative escutcheon (F) onto the dummy

spindle.

5. Thread the door knob (E) onto the dummy spindle.

6. Insert one set screw (C) into the door knob to secure.

Tighten the set screw with the Allen wrench provided (D).

Screwdriver

Drill

Tape Measure

Safety Glasses

Wood Chisel