Installation Sheet

2Copper Freestanding Tub Installation Instructions
COPPER FREESTANDING TUB
2. Move the tub away from the installation location so
that plumbing can be installed. The drain pipe should
extend approximately 6" above the finished floor.
3. When the floor is finished, measure and cut the drain
pipe to the appropriate length for the type of drain that
is being used.
4. Carefully set the tub in position. If the tub has
leveling feet, adjust as necessary until level and apply a
dab of silicone under each foot. If your tub does not
have leveling feet, shims can be used for leveling if your
floor is not flat.
INSTALLATION
TUB AND DRAIN WITHOUT OVERFLOW
1. Set the tub in the desired installation location and
mark the drain hole location on the floor.
Proceed to the appropriate drain configuration to
complete rough-in and installation.
6 inches