Air Kit Installation

6. Secure the system’s security device to the wall or a
surrounding surface using the hardware provided.
Important: The security device must be installed 2”
higher then your tub rim’s lowest point. Please
measure or refer to your tub’s specifications as a
reference before mounting the security device.
5. Connect one end of the 9’ air hose to the second
end of the security device. Use a provided hose clamp
to secure. Connect the opposite end of the hose to
the manifold underneath the tub, using another hose
clamp to secure.
Note: You will need to use the provided 1-1/4” hose
adapters at each end of the hose to make your
connections.
7. Plug the blower motor into its dedicated electrical
receptacle. Proceed to Step 3 of installation to
program your remote control.
AIR MASSAGE KIT INSTALLATION INSTRUCTIONS
4
Air Massage Kit Installation Instructions
2”
air in
air out