Installation Sheet

1Glass Shelf Installation Instructions

INSTRUCTIONS

Unpack and inspect the product for any shipping

damages and ensure that none of the required

pieces are missing. If you ﬁnd damages, do not

install. Contact Customer Service at

1.866.855.2284. If you need assistance or have

questions while installing your glass shelf, contact

Customer Service.

We recommend consulting a professional if you are

unfamiliar with installing bathroom ﬁxtures.

Signature Hardware accepts no liability for any

damage to the shelf or wall, or for personal injury

during installation.

Read the installation instructions below. Observe

all local building and safety codes.

TOOLS AND MATERIALS:

Pencil

BEFORE INSTALLING SINGLE SHELF INSTALLATION

1. Hold the glass shelf up to the wall to determine where you

would like to place it. Using a level and pencil, draw a light

line on the wall the length of the shelf.

2. Attach the rail to the glass shelf using supplied screws and

washers. (Figure 1)

3. Mark the positions of the escutcheons along the line on

the wall that you drew in step 1, making sure the escutcheons

are the same distance from each end of the shelf.

4. Hold the mounting brackets up to the wall directly on top of

the escutcheon guidelines created in the previous step.

Use the screw holes in the mounting brackets to mark your

drilling location.

5. Use a drill bit that corresponds to the size of the included

screws to drill your mounting holes.

6. Use the supplied screws to aﬃx the mounting brackets to

the walls. Place the assembled support rail and escutcheon

onto the installed mounting brackets and secure the set

screws with supplied Allen wrench.

7. Insert the glass shelf and tighten the set screws to secure.

Tape Measure

GLASS SHELF

Level

Screwdriver

Drill

Safety Glasses

PAGE 1
GLASS SHELF BEFORE INSTALLING SINGLE SHELF INSTALLATION Read the installation instructions below. Observe all local building and safety codes. 1. Hold the glass shelf up to the wall to determine where you would like to place it. Using a level and pencil, draw a light line on the wall the length of the shelf. INSTRUCTIONS 2. Attach the rail to the glass shelf using supplied screws and washers.
PAGE 2
TWO-TIERED GLASS SHELF INSTALLATION 1. Hold one of your glass shelves up to the wall to determine where you would like to place the top shelf. Using a level and pencil, draw a light line on the wall the length of the top shelf. 2. On the support rail, measure the distance between the two notches that will hold the top and bottom glass shelves. Lightly draw a horizontal line on the wall at that distance below the ﬁrst line to indicate the position of the bottom shelf. 3.
PAGE 3
THREE-TIERED GLASS SHELF INSTALLATION 1. Hold one of your glass shelves up to the wall to determine where you would like to place the top shelf. Using a level and pencil, draw a light line on the wall the length of the top shelf. 2. On the support rail, measure the distance between the notches that will hold the top, middle and bottom glass shelves. Lightly draw horizontal lines on the wall at that distances below the ﬁrst line to indicate the positions of the middle and bottom shelves. 3.