Manualshelf

Installation Sheet

ManualsBrandsSignature Hardware ManualsShower FaucetsSignature Hardware Gooseneck Hand Shower Conversion Kit with Brass Shower Head, Porcelain Lever Handles and 54" x 27" D Curtain Ring
123456
3
SHOWER CONVERSION KIT WITH HAND SHOWER
5. Attach the handheld shower head to its handle, then
use the provided hose to connect the hand shower to
the diverter outlet, as shown. Insert one of the provided
rubber O-rings into each end of the hose before
tightening.
6. Insert the upper riser pipe through the mounting hole
located on the shower curtain rod. Attach the upper
riser pipe by threading it into the lower riser pipe. Apply a
bit of thread sealant or plumber’s tape to the threads
before tightening.
Tip: If your shower curtain rod does not contain a
mounting hole for your riser pipe, secure the riser to the
rod using a double-ringlet coupler (sold separately).
7. Complete the installation by installing the shower
head onto the upper riser pipe.
8. Once installation is complete, turn the faucet on and
divert water to the shower components. Check to ensure
that there are no leaks from any of the connections, and
that all functions are working properly.
Shower Conversion Kit with Hand Shower Installation Instructions