AirPrime and HL7588 Product Technical Specification Rev9 0
Table Of Contents
- Contents
- List of Figures
- List of Tables
- 1. Introduction
- 2. Pad Definition
- 3. Detailed Interface Specifications
- 3.1. Power Supply
- 3.2. Current Consumption
- 3.3. VGPIO
- 3.4. BAT_RTC
- 3.5. SIM Interface
- 3.6. USB
- 3.7. Electrical Information for Digital I/O
- 3.8. General Purpose Input/Output (GPIO)
- 3.9. Main Serial Link (UART1)
- 3.10. POWER-ON Signal (PWR_ON_N)
- 3.11. Reset Signal (RESET_IN_N)
- 3.12. Analog to Digital Converter (ADC1)
- 3.13. Clock Interface
- 3.14. PCM
- 3.15. Debug Interfaces
- 3.16. RF Interface
- 4. Mechanical Drawings
- 5. Design Guidelines
- 6. Reliability Specification
- 7. Legal Information
- 8. Ordering Information
- 9. Terms and Abbreviations
4116369 Rev 9.0 September 04, 2017 23
Product Technical Specification
Pad Definition
Pad #
Signal Name
Function
I/O
Active
Low / High
Power Supply
Domain
Recommendation
for Unused Pads
Type
71 - 166
Note: These pads are not available on the AirPrime HL7548 and HL7588 module.
167 - 234
GND
Ground
GND
0V
Core
236
JTAG_RESET
JTAG RESET
I
L
1.8V
Left Open
Extension
237
JTAG_TCK
JTAG Test Clock
I
1.8V
Left Open
Extension
238
JTAG_TDO
JTAG Test Data Output
O
1.8V
Left Open
Extension
239
JTAG_TMS
JTAG Test Mode Select
I
1.8V
Left Open
Extension
240
JTAG_TRST
JTAG Test Reset
I
L
1.8V
Left Open
Extension
241
JTAG_TDI
JTAG Test Data Input
I
1.8V
Left Open
Extension
242
JTAG_RTCK
JTAG Returned Test Clock
O
1.8V
Left Open
Extension
* This signal is only available on the HL7588.