User's Manual

Appendix
A.2 Typical operating procedures and potential fault scenarios
Wireless Teach Pendant F IWLAN V2
262 Operating Instructions, 08/2010, A5E02453837-01
A.2.7 Leaving a protection zone without logging off
Requirement
● A security system is installed for the protection zone, for example, a photoelectric sensor
or a contact pressure mat.
● The HMI device has been logged on to a machine, such as "Robot 1", via an RFID tag.
5RERW
LED display EMERGENCY
STOP button
Enabling button
6$)( 3:5 &20 51* %$7
Procedure
1. You leave the protection zone with the HMI device through the security system.
The HMI device initiates a local rampdown.
The "Forced logoff" dialog opens with the following symbol.
2. Close the "Forced logoff" dialog with "OK".
Result
The HMI device is logged off the machine. The machine is free again for logon.
LED display EMERGENCY
STOP button
Enabling button
6$)( 3:5 &20 51* %$7
PRELIMINARY II
1.7.2010