User Manual

IP Gateway KNX/BACnet N 143 –
certified system integration
Combining and commissioning flexible room automation and
smart building automation and control systems made easy
Productive KNX/BACnet connection
The IP Gateway KNX/BACnet allows you to
integrate KNX installations quickly, easily
and efficiently into BACnet-based net-
works and building automation and
control systems. The gateway’s on-board
KNXnet/IP interface eliminates the need
for a separate commissioning interface.
Commissioning made easy
Commissioning is done with ETS only –
no additional tools are required. This
eliminates the effort for training and tool
maintenance. The device automatically
maps the configuration of KNX objects
created using ETS to associated BACnet ob-
jects. All you need to do in ETS is to set a
few parameters and link group addresses.
No special training is required to config-
ure the gateway. The basic functionalities,
reflected in KNX certification, simplify and
accelerate gateway deployment.
The procedure to commission the
gateway within the BACnet system is
the same as the standard process for
any B-ASC*. Easy integration simplifies
planning and assignment of disciplines
as well as of responsibilities for the KNX
installation and the BACnet system.
Remote access for added flexibility
The on-board KNXnet/IP interface allows
you to configure and commission the
gateway and any other devices on the
connected KNX bus. Using the integrated
web server, you can view the BACnet
configuration and the current values of
the BACnet objects in any web browser.
This supports easy integration in BACnet.
Reliable communication
LED displays on the housing show a
reliable overview of the communication
status without requiring additional tools.
Highlights
■
KNX-certified gateway for easy
integration of KNX installations
in BACnet systems
■
Complete configuration using
ETS without the need for an
additional commissioning
interface
■
Acts as a BACnet Application
Specific Controller (B-ASC) in
BACnet
■
Integrated KNXnet/IP interface
for configuring the gateway
and other KNX devices
* B-ASC = BACnet Application
Specific Controller
The worldwide
standard for
home and
building control
www.siemens.com/gamma