User Manual

ManualsBrandsSiemens ManualsExtinguishing - Cylinder Valve ActuatorsACTF230-PNEUMS

A6V11162625_en--_a Smart Infrastructure

2020

Building Products

Sinorix™

ACTF230-PNEUMS

IG-01, IG-55, IG-100, IG-541, CO2

Pneumatic actuator for F230 cylinder valve

● Compatibility with F230 valves

● Mounting on the actuation port PM

● Product includes: pneumatic actuator and rotating tee fitting

● Multi-purpose: compatible with the entire pressure range used in the pilot line of

the Sinorix™ automatic CO2 or inert gas extinguishing systems with F230 cylinder

valves

Product code: S54476-B520-A1

Summary of content (6 pages)

PAGE 1
Sinorix™ ACTF230-PNEUMS IG-01, IG-55, IG-100, IG-541, CO2 Pneumatic actuator for F230 cylinder valve ● Compatibility with F230 valves ● Mounting on the actuation port PM ● Product includes: pneumatic actuator and rotating tee fitting ● Multi-purpose: compatible with the entire pressure range used in the pilot line of the Sinorix™ automatic CO2 or inert gas extinguishing systems with F230 cylinder valves Product code: S54476-B520-A1 A6V11162625_en--_a 2020-09-02 Smart Infrastructure Building Pro
PAGE 2
Use This product must only be used with SinorixTM fixed automatic extinguishing systems. Functions An actuator is a valve opening device used to release the gas contained in the cylinder. The pneumatic actuator is fitted to the cylinder valve PM actuation port. It is activated by the pressure from the pilot line. Type summary Item Description Item Description 1 Rotating tee fitting with two L6 (m) connections (M12x1.
PAGE 3
Notes Safety This product may only be installed by Siemens-authorized specialized installers, with experience in the design, installation and maintenance of automatic extinguishing systems.
PAGE 4
Inspection The frequency of the product inspection is subject to applicable local regulations. For more information, refer to the maintenance documentation. ● ● Check the good condition of the product. Check that each fitting has been properly tightened using the appropriate wrench. Retighten if necessary. Refer to the mounting and maintenance instructions to obtain the detailed procedure. After an actuation ● Unscrew the actuator from the cylinder valve. ● Replace the cylinder.
PAGE 5
Technical data Technical data Actuation pressure nominal PN8 (bar) minimum 8 bar(1) maximum 360 bar Gaseous agent IG-01, IG-55, IG-100, IG-541, CO2 Thread Actuator M18x1 F230 cylinder valve (PM actuation port) Tee fitting L6 (M12x1.5) Materials Actuator body Brass, stainless steel Tee fitting Galvanized steel Seal NBR Operating temperature -20 °C to +50 °C, non-condensing Transport and storage temperature -40 °C to +70 °C, non-condensing Weight (including tee fitting) 0.
PAGE 6
Dimensions Dimensions in mm Issued by Siemens Switzerland Ltd Smart Infrastructure Global Headquarters Theilerstrasse 1a CH-6300 Zug Tel. +41 58 724 2424 www.siemens.com/buildingtechnologies 6 Siemens Schweiz AG Building Products Document ID A6V11162625_en--_a Edition 2020-09-02 © Siemens Switzerland Ltd, 2017 Technical specifications and availability subject to change without notice.