User Manual Part 3

SIMATIC RF300
System Manual, Release 04/2006, J31069 D0166-U001-A2-7618
Index-1
Index
8
8xIQ-Sense module
Addressing, 7-5
Configuration, 7-3
Indicators, 7-2
A
Active surface, 4-6
ANT18 and ANT30 transmission window, 4-4
Application Planning
SIMATIC RF300, 4-1
Approvals, A-1
ASM 452
Configuration, 7-10
Dimensions, 7-16
Indicators, 7-9
Operating mode, 7-11
Ordering data, 7-17
Pin assignments, 7-9
PROFIBUS address and terminating resistor, 7-13
PROFIBUS configuration, 7-11
PROFIBUS Diagnosis, 7-15
Reader connection system, 7-11
Technical data, 7-14
ASM 456
Cable, 7-28
Cable assembly by the customer, 7-29
Cable lengths, 7-28
Configurations, 7-21
Design, 7-20
Dimensional drawing with ECOFAST connection
block, 7-33
Features, 7-19
Field of application, 7-18
LED display for PROFIBUS diagnosis, 7-31
Ordering data, 7-34
PROFIBUS hardware configuration, 7-21
Setting PROFIBUS address, 7-22
Status display with LEDs, 7-31
Status LEDs, 7-30
Technical data, 7-32
Wiring ECOFAST connector plugs, 7-25
Wiring M12, 7/8" connector, 7-26
With connection block M12, 7/8, 7-33
ASM 473
Configurations, 7-37
Design and function, 7-35
Dimensions, 7-41
Features, 7-35
Hardware configuration, 7-39
Maximum configuration of an ET 200X, 7-39
Notes on operation, 7-38
Ordering data, 7-42
Pin assignments, 7-36
Reader connection system, 7-39
Technical data, 7-40
ASM 475
Assignment for connecting cable, 7-47
Cable installation, 7-47
Configuration, 7-46
Design and function, 7-43
Function of the LEDs, 7-45
Indicators, 7-45
Ordering data, 7-50
Pin assignment, 7-48
Status display with LEDs, 7-45
Technical data, 7-49
ASM 475 configuration
Centralized configuration, 7-46
Decentralized design, 7-47
ET 200M, 7-46