User's Manual Part 2
Table Of Contents
- 5 Readers
- 5.1 RF 310-R
- 5.1.1 Features
- 5.1.2 Indicators
- 5.1.3 Transmission window
- 5.1.4 Metal-free area
- 5.1.5 Minimum distance between several RF 310-R units
- 5.1.6 RF 310-R field data
- 5.1.7 Pin assignment of the IQ-Sense interface
- 5.1.8 Cable and connector pin assignment
- 5.1.9 Technical data of the RF 310-R
- 5.1.10 FCC information
- 5.1.11 RF 310-R ordering data
- 5.1.12 Dimension drawing
- 5.1 RF 310-R
- 6 Transponder/tags
- 7 Communication modules
- 8 Accessories
- A Appendix
- List of abbreviations
- Glossary
- Index
Communication modules
7.1 8xIQ-Sense
RF 300
System Manual, 05/2005, (4)J31069 D0166-U001-A1-7618, --
7-5
7.1.4 Addressing
The address range of the 8xIQ-Sense module is 16 bytes I/O.
This is independent of the choice of channel profiles on the connected device
(i.e. the IQ profile IDs in HW Config).
Access to memory areas
A direct association exists between the number of the channel to which the IQ-Sense device
is connected (terminal) and the input and output data area of the module. Based on the
address range, the following addresses can be used to access the memory areas:
Address = module initial address + (channel no. x 2)