User Manual

1/2

Building Technologies 13-01-950 E.doc

Fire Safety & Security Products

Pressure regulator ENGLISH

13-01-950

PED-category:

Pressure reducer (L10/200 LabLine)

10 bar output

PRED-200 10

Index Description Date

Fluid group: 25.05.09

Product line

Sinorix ™

a VdS approved 25.01.10

b CO2 gaseous 18.05.18

SAP

A5Q00036889

GLA 09066

Technical data

OEM type 17652901

agent (gaseous form) N2, Ar, CO2, compressed air

outlet pressure range 10 bar, factory adjusted

operation inlet pressure max 250bar

safety valve release pressure 12-13 bar

flow 45 Nm

/h bei 10bar

inlet G1 L8 mm cutting ring Swagelok,stainless steel

outlet G2 L8 mm cutting ring Swagelok,stainless steel

pressure gauge inlet none

pressure gauge outlet 0-16 / 10bar (DIN EN 562), class 2.5

weight 1.5 kg

dimensions 200 x 190 x 75 mm

marking N200MJJ (MJJ=manufacturing date)

material

membrane metallmembrane SS321 (1.4541), chrome-plated

valve body brass chrome-plated

Usage

This pressure reducer is used in Sinorix

extinguishing systems. It reduces the control cylinder pressure to 10bar. This

reduced pressure is used for pneumatic time delay devices, pneumatic actuators on extinguishing cylinders, pneumatic

horns and selector valve drive gears for 10 bar.

PAGE 1
Pressure regulator ENGLISH 13-01-950 PED-category: Fluid group: Product line Sinorix ™ SAP A5Q00036889 Pressure reducer (L10/200 LabLine) 10 bar output Index Description a b VdS approved CO2 gaseous Date 25.05.09 25.01.10 18.05.
PAGE 2
Installation Warning! Do not use oil or grease with this product. Ensure the pilot cylinder valve is isolated (e.g. remove the solenoid from the cylinder valve) before installing and adjusting the pressure regulator. CO2 pilot cylinder always without diptube. Inlet from CO2 distribution pipe network to extinguishing nozzles forbidden. Fit the pressure regulator to a solid vibrations free surface close to the pilot cylinder ensuring that the inlet port is orientated towards the pilot cylinder.