Cerberus PACE Power supply and batteries PP20xx-A1, PA20xx-A1 EN 54-4-certified power supply and batteries for the Cerberus PACE voice alarm and announcement system.
Use The power supply units provide DC 24 V to all system components. The power supply units ensure that the Cerberus PACE voice alarm system continues to operate without interruption in case of an 'AC 230 V' line voltage failure by providing a DC 24 V from the emergency batteries. The power supply units also charge, monitor, and protect all emergency batteries. The batteries are charged in accordance with the standard EN 54-4 based on their nominal capacity.
Second source power supplies NOTICE! Order alternatives only if the preference is not available. PP2005-A1 'SLAT SON 24V 12A MS150' ● ● ● ● ● ● ● ● EN 54-4-certified 19'' / 2 HU housing Charging, monitoring, and protecting emergency power batteries Power supplied to all system components via DC 24 V Emergency power supply to all system components Input voltage 230 V / 50 Hz Max.
PA2009-A1 'Merawex MXL 150-12 FT Battery' ● ● ● ● ● ● ● Maintenance-free lead battery Capacitance: 150 Ah Voltage: 12 V Rechargeable Front terminals Gas-tight Acid-free Second source batteries NOTICE! Order alternatives only if the preference is not available.
PA2012-A1 'Triathlon FT-12100H Battery' ● ● ● ● ● ● ● ● PA2016-A1 'SunBattery SB12-100HFT Battery' ● ● ● ● ● ● ● ● PA2013-A1 Maintenance-free lead battery Capacitance: 100 Ah Voltage: 12 V Rechargeable Front terminals Gas-tight Acid-free Second source for PA2008-A1 'Triathlon FT-12150 Battery' ● ● ● ● ● ● ● ● PA2017-A1 Maintenance-free lead battery Capacitance: 100 Ah Voltage: 12 V Rechargeable Front terminals Gas-tight Acid-free Second source for PA2008-A1 Maintenance-free lead battery Capacitance
Type Overview Preferred power supplies Type Designation PP2003-A1 PP2004-A1 Merawex ZDSO-400-DR2 320 Ah Merawex ZSP135 DR-7A-3 40 Ah S54451-B61-A1 S54451-B62-A1 320 Ah 45 Ah Cabinet installation 19" Wall mounting Order number Max. battery capacity Mode of mounting Second source power supplies Type PP2005-A1 Designation SLAT SON 24V 12A MS150 Order number S54451-B73-A1 Max.
Component combinations The Cerberus PACE system is only compatible with the power supply and battery types listed in this document. Equivalent or similar types not listed in this document must not be used.
Order numbers Type Designation Order number Preferred power supply 1 PP2003-A1 Merawex ZDSO-400-DR2 320 Ah S54451-B61-A1 PP2004-A1 Merawex ZSP135 DR-7A-3 40 Ah S54451-B62-A1 Second source power supply 1 PP2005-A1 SLAT SON 24V 12A MS150 S54451-B73-A1 PA2006-A1 Merawex MXL 40-12 Battery S54451-B68-A1 PA2007-A1 Merawex MXL 65-12 Battery S54451-B69-A1 PA2008-A1 Merawex MXL 100-12 FT Batt. S54451-B70-A1 PA2009-A1 Merawex MXL 150-12 FT Batt.
Product documentation You will find more information on the Cerberus PACE system and its components in the following documents: Title Document ID IT security policies Cerberus PACE – IT security policies A6V11439692 System documentation Cerberus PACE – planning A6V11244536 'PACE-Design' – configuration A6V10429097 Cerberus PACE – mounting / installation A6V10430579 Cerberus PACE – operation A6V10430571 Data sheets System data sheet A6V11243351 19" cabinets A6V10429243 Digital audio matrix A
Notes Safety CAUTION National safety regulations Failure to comply with national safety regulations may result in personal injury and property damage. ● Observe national provisions and comply with the appropriate safety regulations. Planning Ensure that all used batteries connected to a power supply are of the same type. The system has a system voltage of 24 V. The emergency power supply therefore requires two 12 V batteries for each power supply.
You can obtain the document A6V11948779 via the following Internet address: https://siemens.com/bt/download Enter the document ID in the search field. Guarantee The application-specific technical data is guaranteed only in combination with the Siemens products listed in the 'Component combinations' section. If third-party products are used, any guarantee provided by Siemens will be invalidated.
Technical data Power supply PP2003-A1 Ordering PP2004-A1 Preferred PP2005-A1 Second source Supply Power supply Current consumption AC 230 V +10 %/-15 % AC 230 V +10 %/-15 % AC 230 V +15 %/-15 % Max. 2.7 A Max. 1.5 A Max. 2.0 A Frequency Internal fuse 47…53 Hz None Fuse dependent on cabinet 1x 230 V fuse 1x 24 V fuse 1x 230 V 6.4 A T fuse 1x 24 V 12.
PP2003-A1 PP2004-A1 PP2005-A1 Battery management Float voltage at 25 °C Max. charging current 27.1 V 27.2 V +/-0.5 % 16 A - 12 A Max. capacity of battery bank 2 320 Ah Max. 2 banks 45 Ah 225 Ah Min. capacity of battery bank 2 65 Ah 35 Ah 65 Ah Low charge error voltage 21 V 21.6 V 21.6 V +/-3 % 50 mΩ 250 mΩ 16 mΩ -5…+45 °C -25…+55 °C +75 °C for max.
4 'Imax a' according to EN 54-4. 'Imax a': maximum output current while the battery is being charged and the system is in non-alarm mode. 'Imax a' is the sum of the two AUX output currents. Preferred batteries Nominal capacity (Ah) PA2006-A1 PA2007-A1 PA2008-A1 PA2009-A1 40 65 100 150 Voltage DC 12 V Ambient conditions Operating temperature Charging: -15…50 °C Discharging: -20…60 °C Storage temperature -20…+70 °C Operation in humid environments (without moisture condensation) 10...
Second source batteries Nominal capacity (Ah) PA2010-A1 PA2011-A1 PA2012-A1 PA2013-A1 45 65 100 150 Voltage DC 12 V Ambient conditions Operating temperature Charging: -15…+50 °C Discharging: -20…+60 °C Charging: 0…+40 °C Discharging: -15…+50 °C -20…+70 °C -15…+40 °C Storage temperature Operation in humid environments (without moisture condensation) 10...90 % rel. Storage in humid environments (without moisture condensation) 5...90 % rel.
Issued by Siemens Switzerland Ltd Smart Infrastructure Global Headquarters Theilerstrasse 1a CH-6300 Zug +41 58 724 2424 www.siemens.com/buildingtechnologies Document ID A6V10430553_en--_c Edition 2021-06-30 © Siemens Switzerland Ltd, 2018 Technical specifications and availability subject to change without notice.