MT8001 MP4.
Data and design subject to change without notice. / Supply subject to availability. © 2008 Copyright by Siemens Switzerland Ltd We reserve all rights in this document and in the subject thereof.
Table of contents 1 Introduction .............................................................................................4 2 What’s new in MP4.15.............................................................................5 2.1 2.2 2.3 Backward compatibility .............................................................................5 Changes to configuration procedure.........................................................5 Approvals .............................................................
Introduction 1 Introduction This document applies to the MT8001 MP4.15 and covers the following topics: – What’s new in MP4.15........................................................................ p. 5 – Subsystem equipment, versions supported, and connectivity ........... p. 6 – Migrating from previous releases ....................................................... p. 7 – Known issues in MP4.15 .................................................................. p. 10 – Documentation ..................
What’s new in MP4.15 2 What’s new in MP4.15 This section details the differences between the new MP4.15 and the previous version MP3.15. These include: – Backward compatibility to Composer MP4.10 – Changes to configuration procedure – Approval certificates 2.1 Backward compatibility MT8001 MP4.15 is compatible with WW8000 Composer MP4.10. This allows the MT8001 Management Terminal to be present in MM8000 MP4.10 projects. 2.2 Changes to configuration procedure To configure the MT8001 MP4.
Subsystem equipment and connectivity 3 Subsystem equipment and connectivity Control units Notes about latest version supported EP7F Z2.1 (V7.8x) CS11 AlgoRex® EP5 and EP7 FC700A STT11 CZ10 / CC60 / CS440 Cerloop and NK8000 CS6 Guarto™ MP3 MP3+ Firmware F8-05 F09 not compatible SI410/420 Sintony™ via NK8000 via NK8000 Cerloop and NK8000 DMS7000 units: MM/MF-7033 etc. DF8000/CF9000 I/O (DF8003 or CF9003 + DF8020/8040/8045/8046) Cerloop and NK8000 Tab.
Migrating from previous releases 5 Migrating from previous releases 5.1 Update procedure from MP1.01 Composer projects generated in MP1.01 cannot be used with later versions of the MT8001. An entire new 4.15 configuration needs to be entered in the new Composer, reproducing what was done for the 1.01 version. 5.2 Update procedure from MP1.10 / 1.20 Existing MT8001 1.10 / 1.20 projects must first be updated to MP3.15 before updating to MP4.15 following the procedure below. 1. Install the Composer MP3.
Migrating from previous releases 5.3 Update procedure from MP3.15 Existing MT8001 3.15 projects can be updated to MP4.15 first updating the configuration data, and then the firmware. 5.3.1 Update configuration data 1. Install the configuration tools according to section 4. 2. Restore the project. 3. When requested, upgrade the XML. 4. When the project opens, select a map and select “Upgrade Map”. 5. Repeat step 4 for all maps. 6.
Migrating from previous releases Fig. 1 5.3.3 File and folder structure CompactFlash update procedure from 3.15 using Card Reader 1. Get the CD with new firmware files. Note the files and folder structure of the MT8001 CompactFlash: \NK.BIN \CEBOOT.SYS \PREVBOOT.SEC \MT8001\HISTORY\… (History archive) \MT8001\COMMUNICATIONLAYER\… (Data and program files) 2. Power off the MT8001. 3. Unplug the CompactFlash from the MT8001. 4. Insert the CompactFlash into your Card Reader and connect it to your PC. 5.
Known issues in MP4.15 6 Known issues in MP4.15 The following is a list of known limitations, problems and bugs, and recommended practises regarding MP4.15 at the time of this market package release. For customer support links, see section 8.1 on page 14. The printer is not supervised. In some cases, users configured to be unable to close events can close them as the close icon erroneously becomes active. Occasionally the Properties page is not refreshed after a user sends a command.
Documentation 7 Documentation All documents were updated to include the new features added in MP4.15. Note the document numbers related to the new STEP numbering. STEP documentation repository On the Siemens intranet, the product documentation can be found in the STEP Documentation Repository. The STEP Web Client interface is available at the following address: https://workspace.sbt.siemens.com/content/00001123/default.aspx The following describes one way to search and find a document: 1.
Documentation Sales Guide (document no. A6V10096197_a_en) This document contains background information about the target market for the MT8001, potential pitfalls to avoid, and some sales arguments. Tender Specifications (document no. A6V10096200_a_en) This document is currently in the standard Siemens format, but it is designed for use and adaptation(s) by independent contractors responsible for selecting and managing the installation and upgrades of a security system for the final customer. 7.
Documentation Quick reference guides These concise, convenient guides are designed to serve as “memory-joggers” when configuring or operating the MT8001. The quick reference guide set includes: – Composer Configuration (document no. A6V10067783_a_en) – Graphical Map Configuration (document no. A6V10069550_a_en) – Operation (document no. A6V10096142_a_en) History viewer (document no. A6V10096164_a_en) This is a guide to using the Event History application that is included with the MT8001 Management Terminal.
Customer support links & resources 8 Customer support links & resources 8.1 MT8001 Updated in 4.15 Our Customer Support Centre intranet site at: https://intranet10.sbt.siemens.com/about_bt/Business_Units/fs/Customer+Support+Cent er/?languagecode=en provides useful information and links. In the Online Support section of this intranet page, software downloads and known product issues can be found in the PSP (passwordprotected Product Support Platform). The support mailbox is: fs.support.sbt@siemens.com.
Siemens Switzerland Ltd Building Technologies Group International Headquarters Fire Safety & Security Products Gubelstrasse 22 CH-6301 Zug Tel +41 41 724 24 24 Fax +41 41 724 35 22 www.sbt.siemens.com Document no. A6V10065354_a_en_ Edition 06.
