User Manual

ManualsBrandsSiemens ManualsFire - Modular & Networkable Control SystemsFire terminal

009386_r_en_-- Building Technologies

2018

Control Products and Systems

Sinteso™

Fire terminal

FT2040

Compact, pre

assembled fire terminal with integrated, user

friendly operating unit for

system operation and display.

● System operation and display functions

● Ergonomically arranged operating and indication elements grouped according to

function

● Large backlit display: 8 lines of 40 characters each

● Convenient context- and state-based operation via soft keys

● One text display with two lines of information for each alarm event

● Ability to store location-specific action texts

● Simultaneous display of multiple events

● Different levels of operation according to access level

● Operating access via a password or optional key switch

● Possible to have several fire terminals per fire detection system

● Extensions: Event printer, power supply, serial interfaces

Summary of content (16 pages)

PAGE 1
Sinteso™ Fire terminal FT2040 Compact, pre-assembled fire terminal with integrated, user-friendly operating unit for system operation and display.
PAGE 2
Features and Functions System The diagrams have been simplified and do not include additional network hardware or security components. Permissible applications are described in the A6V101039125 Network Security Guidelines document. Contact your Siemens IT security expert for more information.
PAGE 3
1 Remote access with SintesoView/ Sinteso Touch 2 FS cloud applications 3 Customer network 4 Management platform 5 Remote access to management platform 6 Remote access with Sinteso Mobile 7 Router + Firewall + Virtual Private Network 8 Fire damper with actuator Transmission of a fault signal Transmission of an alarm signal You will find a detailed labeled version of the diagram above along with further information in the A6V10906627 planning guide, see chapter 'Product documentation'.
PAGE 4
Networking of fire control panels The diagrams have been simplified and do not include additional network hardware or security components. Permissible applications are described in the A6V101039125 Network Security Guidelines document. Contact your Siemens IT security expert for more information. Up to 32 control panels and terminals can be linked to form one FCnet network. If the FCnet network is connected to a danger management system via BACnet, up to 16 control panels and terminals can be networked.
PAGE 5
An optical FCnet/LAN network allows up to 14 sub-nets with up to 16 stations to be operated in one network. A maximum of 64 stations is supported in total.
PAGE 6
Terminals General features and functions ● Person Machine Interface that is used remotely from the control panel, which can be optionally provided with its own power supply ● Up to five fire terminals can be configured with system-wide visibility. ● The fire terminal has spaces for installing optional interfaces such as an RS232 or RS485, network modules (SAFEDLINK), and a key switch. ● Each fire terminal has an Ethernet connection.
PAGE 7
Extensions FCM2036-A2 Operating add-on (4xLED indicator) ● FCM2038-A2 Operating add-on (2xLED indicator) ● FH2001-A1 Thermal printer for installation in operating units or operating add-ons Can be controlled via the RS232 module FCA2001-A1 (order separately) Logs all important events, such as alarms, faults, isolations, and test functions Matrix printer (external) ● ● ● ● Building Technologies Fire Safety Empty housing for A4 documents 430 x 398 x 103 mm Depth 50 mm Event printer ● ● ● DL3750+ Em
PAGE 8
Design Function elements Operating unit The following elements are available on the operating unit: ● CPU module and electronics ● Ethernet connection ● Slots for RS232 and RS485 modules and network modules (SAFEDLINK) ● Space for 'Kaba' or 'nordic' key switch ● Space for event printer (depending on version) Fire terminal board Connection terminals for the following elements are available on the fire terminal board: ● Optional power supply ● 24 V supply from a control panel ● External 24 V power source Hous
PAGE 9
Operation FT/FC20xx 8 2 1 ALARM 9 User 2 6 4 User 1 Silence buzzer 3 User 3 Acknowledge 7 User 4 More Alarms Reset FAULT Remote alarm Active Fault / Of f Alarm delay Of f ISOLATION Alarm device Premises manned 10 11 12 DETECTOR TEST Active Fault / Of f System Control function User 5 On Fault Active Fault / Of f User 6 5 13 Indication and operating elements Building Technologies Fire Safety Position Comment 1 Backlit 8-line LC display with 40 characters per line and d
PAGE 10
Setup 13 14 3 1 2 16 12 4 6 7 10 8 9 10 15 5 11 Layout of FT2040 Position Designation Type Comment Items 1-5: Basic equipment Basic equipment 1 Housing (Eco) FHA2001-A1 2 Fire terminal board FTI2001-A1 3 U-rail TS35 - Space for socket, disconnect terminals 4 Operating unit FCM20xx-xx Operating unit with CPU 5 Space for batteries - Max.
PAGE 11
Position Designation Type Comment Extensions 6 Power supply (70 W) FP2015-A1 If fire terminal is not supplied with power by the control panel 7 Key switch (Kaba) FTO2005-C1 For operating access authorization Key switch (nordic) FTO2006-B1 8 RS485 module (isolated) FCA2002-A1 For peripheral devices with RS485 interface 9 RS232 module (isolated) FCA2001-A1 For devices with an RS232 interface 10 Network module (SAFEDLINK) FN2001-A1 For networking several stations 11 Battery (12 V, 7
PAGE 12
Details for ordering Fire terminals Type Designation Weight Order number FT2040-AZ Fire terminal 5.767 kg A5Q00016702 FT2040-EZ Fire terminal 5.887 kg A5Q00016720 Type Designation Weight Order number FCA2001-A1 RS232 module (isolated) 0.033 kg A5Q00005327 FCA2002-A1 RS485 module (isolated) 0.027 kg A5Q00009923 FCA2014-A1 Cable kit (communication) 0.126 kg A5Q00023027 FCM2036-A2 Operating add-on (4xLED indicator) 3.
PAGE 13
Battery Type Designation Weight Order number FA2003-A1 Battery (12 V, 7 Ah, VdS) 2.350 kg A5Q00019353 FHA2061-A1 Mounting kit (batteries) ‒ S54400-B91-A1 Type Designation Weight Order number FCA2033-A1 License key (S1) 0.010 kg S54400-P154-A1 FCA2034-A1 License key (S2) 0.010 kg S54400-P155-A1 FCA2035-A1 License key (S3) 0.010 kg S54400-P156-A1 FCA2036-A1 License key (S4) 0.010 kg S54400-P157-A1 Type Designation Weight Order number DL3750+ Matrix printer (external) 7.
PAGE 14
Product documentation Title Document ID System documentation System description 008836 Product data 008837 Planning 008843 Mounting/Installation 008851 Data sheets FC2020 - fire control panel 009383 FC2030 - fire control panel for modernization A6V10087532 FC2040 - fire control panel 009384 FC2060 - fire control panel (modular) A6V10087844 FC2080 - fire control panel (19", modular) A6V10275515 FT2040 - fire terminal 009386 FT2080 - fire terminal (Touch) A6V10378271 Fire detection syste
PAGE 15
Technical data FT2040 in the housing (Eco) Supply Power supply (optional) 70 W Operating voltage DC 20…30 V Current consumption at 24 V: ● Quiescent current (LCD illumination inactive) 125 mA ● Alarm current (LCD illumination active) 130 mA Max.
PAGE 16
Siemens Schweiz AG; Theilerstrasse 1a CH-6300 Zug Technical data: see doc. 008836 06 FT2040 - Control and Indicating Terminal for use in fire detection and fire alarm systems installed in buildings. 2014/30/EU (EMC): EN 50130-4 / EN 61000-6-3 ; 2014/35/EU (LVD): EN 60950-1 ; 2011/65/EU (RoHS): EN 50581 The declared conformity can be seen in the EU Declaration of Conformity (DoC), which is obtainable via the Customer Support Center: Tel. +49 89 9221-8000 or https://siemens.com/bt/download DoC No.