Installation Instructions

P/N 315-649745-1
INTRODUCTION
The RD-CAB-TK is used to semi-flush mount the RD-CAB-C.
PRE-INSTALLATION
Determine the location where the enclosure is to be mounted. Refer to the RD-CAB-C Installation Instructions,
P/N 315-049640C.
INSTALLATION
Refer to Figure 1 for typical Trim Kit installation.
• Cut the necessary hole in the wall for the RD-CAB-C enclosure.The back-box can be mounted up to
7
/8 inch into the wall.
• Place the semi-flush trim around the back-box and affix to the wall using the four #10 x ¾ inch
wood screws provided. Note: You may need a different screw type, depending on the wall material.
SPECIFICATIONS
RD-CAB-TK
Inside Dimensions:
5
1
/8”H x 14
1
/8”W
Outside Dimensions:
8
1
/8”H x 17
1
/8”W
Siemens Building Technologies, Inc.
8 Fernwood Road
Florham Park, New Jersey 07932
RD-CAB-C ENCLOSURE WITH SEMI-FLUSH TRIM
MOUNT REMOTE DISPLAY
UNIT OF CONVENIENT
HEIGHT FOR ACCESS TO
DISPLAY AND CONTROLS
RD-CAB-C ENCLOSURE
KNOCKOUT LOCATIONS
1 EACH ON TOP AND BOTTOM
OF ENCLOSURE
2 ON BACK SURFACE
1/2 KNOCKOUTS - 4 TOTAL
(7/8” DIA.)
7/8”
MAX.
17 1/8”
2 5/8”
8 1/8”
2”
1”
12”
3/4”
2 1/2”
Figure 1
RD-CAB-TK
INSTALLATION INSTRUCTIONS
Model RD-CAB-TK
Trim Kit
Fire Safety
Siemens Building Technologies, Ltd.
2 Kenview Boulevard
Brampton, Ontario L6T 5E4 Canada