Installation Instructions

P/N 315-699470-1

(447304)

Fire Safety

INSTALLATION INSTRUCTIONS

Model FS-AE/-R

Fire Alarm Accessory Enclosure

Model FS- AE -TK/-R

Accessory Enclosure Semi-Flush Trim Kit

The FS-AE Fire Alarm Accessory Enclosure is an optional accessory for the FS-100 Fire Alarm System

Control Unit. The FS-AE provides an enclosure for FS-RU and FS-RE8 Serial Relay Units and FS-SAU and

FS-SAE Serial Annunciator Units. The FS-AE enclosure provides mounting of up to two FS-RU units and

two FS-RE8 extenders or two FS-SAU units and five FS-SAE16 extenders.

FS-AE SURFACE MOUNTING

Step 1.) Installation is to be done by qualified personnel

who have thoroughly read and understood this

instruction sheet.

Step 2.) Mount enclosure as required.

Step 3.) Attach conduit and run wires as required.

Step 4.) Mount PCB Tracks as required.

Note: See the installation instructions provided with

relay or annunciator units for installation and

wiring.

FS-AE SEMI-FLUSH MOUNTING

WITH FS-AE-TK SEMI-FLUSH TRIM

PAGE 1
Fire Safety INSTALLATION INSTRUCTIONS Model FS-AE/-R Fire Alarm Accessory Enclosure Model FS- AE-TK/-R Accessory Enclosure Semi-Flush Trim Kit The FS-AE Fire Alarm Accessory Enclosure is an optional accessory for the FS-100 Fire Alarm System Control Unit. The FS-AE provides an enclosure for FS-RU and FS-RE8 Serial Relay Units and FS-SAU and FS-SAE Serial Annunciator Units.
PAGE 2
KNOCK-OUT LOCATION A B C D E F G H I J K M N O P M N SAMPLE LAYOUT FOR RELAY UNITS Note: Use knock outs A, E, K or M for power-limited connections to the fire alarm control unit.