Installation Instructions

P/N 315-648955-6
INTRODUCTION
The FS-SFT (black) is used to semi-flush mount the FS-250-ENCL (FS-250) and the FS-250-ENCL-C
(FS-250C). The SFT-R (red) is used to semi-flush mount the FS-250-ENCL-R.
PRE-INSTALLATION
Determine the location where the enclosure is to be mounted. Refer to the FS-250-ENCL or FS-250-ENCL-C
Installation Instructions, P/N 315-648952 or P/N 315-648952C, as applicable.
INSTALLATION
Refer to Figure 1 for typical Trim Kit installation.
• Cut the necessary hole in the wall for the FS-250-ENCL/-R or FS-250-ENCL-C enclosure.The
backbox can be mounted up to 3½ inches into the wall.
• Place the semi-flush trim around the backbox and affix to the wall using the four #10 x ¾ inch
wood screws provided. Note: You may need a different screw type, depending on the wall material.
SPECIFICATIONS
FS-SFT/-R (See Figures 1 and 2)
Inside Dimensions:
22
1
/8”H x 18
1
/8”W
Outside Dimensions:
25
1
/8”H x 21
1
/8”W
Siemens Industry, Inc.
Building Technologies Division
Florham Park, NJ
INSTALLATION INSTRUCTIONS
Model FS-SFT/-R
Trim Kit
Siemens Building Technologies, Ltd.
Fire Safety & Security Products
2 Kenview Boulevard
Brampton, Ontario L6T 5E4 Canada
Figure 1
FS-SFT/-R with FS-250-ENCL/-R
FS-250 ENCLOSURE WITH SEMI-FLUSH TRIM
11 9/64”
Mount Control Unit
of convenient height
for access to
display and controls
FS-250 ENCLOSURE
KNOCK OUT LOCATIONS
TOP AND BOTTOM OF
ENCLOSURE
1/2 AND 3/4 COMBINATION
KNOCKOUTS - 8 TOTAL
(7/8 AND 1 1/8 DIA.)
FS-250 BOX
1”
16”
20 7/16”
9/16” TYP.
25 1/8”
1 9/32”
2 5/8”
4 7/8”
13 1/8”
15 3/8”
18”
21 1/8”
3 1/2”
MAX
SUPERVISORY
SILENCED
ALARM
PRE-
ALARM
ALARM
ON
ACPOWER
TROUBLE
ACKNOWLEDGE
DE-ENERGIZEUNITBEFORESERVICING
1
2
PORT
COM
7
*
GHI
4
PRS
8
0
JKL
TUV
5
CAUTION:
ALARMSILENCE
ABC
A
3
C
D
MENU
B
9
#
6
WXY
MNO
SYSTEMRESET
DEF
M1
M2
M3
M4
(For indoor use only in dry protected environments)