Data Sheet for Product

ManualsBrandsSiemens ManualsFire - Addressable detectors and basesAutomatic fire detectors

Sinteso™ S-LINE

Automatic fire detectors

FDOOT241-9, FDOOT241-A, FDO241, FDT241

For the automatically addressed detector bus FDnet

● The ideal fire detector for every application

● Line separators for uninterrupted alarm function (FDOOT241-A, FDO241 and

FDT241)

● Signal processing with ASAtechnology™ (Advanced Signal Analysis)

● Event-controlled detection behavior

● Early and reliable detection when fires occur

● Highly developed immunity to deceptive phenomena

● FDOOT suitable for wind speeds of 1…20m/s

● Prepared for future requirements thanks to its programmability

● Supports disturbance-free function testing with DFTtechnology™ (Disturbance-

Free Test) as well as scan and test of external alarm indicator (FDOOT241-A,

FDO241)

007005_aj_en_-- Smart Infrastructure

2021-08-27

Summary of content (8 pages)

PAGE 1
Sinteso™ S-LINE Automatic fire detectors FDOOT241-9, FDOOT241-A, FDO241, FDT241 For the automatically addressed detector bus FDnet ● ● ● ● ● ● ● ● ● 007005_aj_en_-2021-08-27 The ideal fire detector for every application Line separators for uninterrupted alarm function (FDOOT241-A, FDO241 and FDT241) Signal processing with ASAtechnology™ (Advanced Signal Analysis) Event-controlled detection behavior Early and reliable detection when fires occur Highly developed immunity to deceptive phenomena FDOOT suita
PAGE 2
Properties Features ● Resistant to environmental and interfering influences such as dust, fibers, insects, moisture, extreme temperatures, electromagnetic interference, corrosive vapors, vibration, artificial aerosols, and atypical fire phenomena ● Shock resistant, theft protection as an accessory ● Time and process-dependent detection behavior ● Proven immunity to faults in power electronics ● Protected electronics, high-quality components ● Sophisticated sensors and electronic monitoring ● Internal alarm
PAGE 3
Multi-sensor fire detector FDOOT241-A ● ● Point detector with additional heat sensors Optional detector dust cap to protect the point detector during the construction phase Function ● Functions according to the scattered light principle with two sensors: Optical forward and backward scattering ● Opto-electronic measuring chamber: Obstructs disruptive extraneous light but can be relied upon to detect both light and dark smoke particles ● Two additional heat sensors increase the fire detector's immunity to d
PAGE 4
Dummy detector FDX291 Use ● To cover bases that are left empty for prolonged periods of time Type Overview Type Designation Order no. Weight [kg] FDOOT241-9 Multi-sensor smoke detector A5Q00004813 0.106 FDOOT241-A Multi-sensor smoke detector S54310-F21-A1 0.106 FDO241 Smoke detector S54310-F19-A1 0.103 FDT241 Heat detector A5Q00004812 0.086 FDB241 Base adapter Sinteso (SIGMA/A+) S54319-F13-A1 0.086 FDB251 Base adapter Sinteso (Interactive) S54319-F28-A1 0.
PAGE 5
Base attachment FDB291 Function: ● For routing surface-mounted cables larger than Ø 6 mm ● Detector base is secured with a snap fastener Base attachment humid FDB293 ● ● ● ● ● ● For achieving a higher protection category For mounting in wet or humid environments Required when using detector heating unit FDBH291 Required when using protective cage DBZ1194 or EMC-protective cage FDBZ294 Mounted between detector base and ceiling Detector base mounted quickly: The detector base simply clicks into place in bas
PAGE 6
Installation Easy, time-saving, and completely reliable mounting ● Detector base FDB221 for surface-mounted and recess-mounted supply lines ● Detector base FDB222 for flush mounting, only for recess-mounted supply lines ● Extra-long mounting slits allow existing drill holes from other systems to be reused. ● A large opening in the detector base makes it easy to feed the cables through ● Screwless connection terminals (spring clip principle) ● Detector line can be connected without any tools.
PAGE 7
Technical data FDOOT241-9 FDOOT241-A Operating voltage (modulated) 65…230 μA 180…230 μA Without sounder base 2 With sounder base 1 Communication protocol FD20or collective System compatibility FS20¹, AlgoRex, SIGMASYS 130…200 μA FDnet FS20¹, SIGMASYS AlgoRex: Product version <67 FS20¹, SIGMASYS AlgoRex: Product version <66 CZ10, CS11, BC10, FC10, XC10, FC330A, FC700A, BMS, SM80/88D100 FS20¹, AlgoRex, SIGMASYS – Operating temperature -25…+70°C -35…+70 °C Storage temperature -30…+75 °C
PAGE 8
FDOOT241-9 FDOOT241-A FDO241 FDT241 G204007 126bh/01 G215052 126bv/05 G204017 126bf/02 G204019 126bj/02 3029351 – – – 3029351 MEDB00003UK 3046115 MEDB00003UR Max. 20 m/s Max. 20 m/s Max. 5 m/s – Approvals: ● VdS ● LPCB (except EN 54-27) ● FM ● DNV GL (marine) Permissible wind speed ¹ FS20 compatibility in FDnet is assured subject to in-country FS20 software support. Dimensional drawing 100 45.7 54.6 45.