User Manual
Building Technologies
Fire safety and security products
FDB181 Detector Base
Product Manual
Overview
The FDB181detector bases is a universal base. It’s fixed on fire detection site and used
for installations of FD181 series detectors:
− FDO181 smoke detector
− FDT181 heat detector
Characteristics
– Universal bases,applicable to both surface install and conceal install
– Large opening in the detector base for easy cable insertion
– Adopt environmental friendly material
Installation
The installation of a base should strictly follow the engineering design drawings. The
bases should be evenly distributed.
Procedure of installation:
1. Insert the cables through the base and connect them to the terminals.
2. Fix the base to the ceiling with screws.
Note:
The detector should be installed after the construction has been finished.
In order to ensure the reliability of the connection between the base and the detector,
please do not use U-type terminals.
Twisted-pairs with the wiring requirement of 1.0~1.5mm
2
are recommended.