EH6..DB1.., EH8..DL1.., EH8..DB1.., EH8..DC1.. [en] Instruction manual ..............................................................
(+ '% (+ '% 2 [ (+ '/ (+ '& [ Ø = cm
Ú Table of contents Safety warnings and advice...................................................... 4 Safety instructions...............................................................................4 Elements that may damage the appliance ....................................5 Protecting the environment ...................................................... 5 Environmentally-friendly disposal of waste products ...................5 Energy-saving advice ......................................................
ã=Safety warnings and advice Please read these instructions carefully. We advise you not to use the appliance until you have read them. Keep the operation and installation instructions. If the appliance is passed on to another user, please ensure that the documentation is also passed on with it. Check the appliance after removing it from the packaging.
Caution! This appliance complies with safety and electromagnetic compatibility standards. However, people with pacemakers must refrain from approaching the appliance when in use. It is impossible to ensure that all of these devices available on the market comply with current electromagnetic compatibility standards, and that interference which may prevent the device from working correctly will not occur.
Induction cooking Advantages of induction cooking Induction cooking represents a radical change from the traditional method of heating; the heat is generated directly in the pan. It therefore offers a number of advantages: ■ ■ ■ ■ Time savings for cooking and frying; since the pan is heated directly. Energy is saved. Care and cleaning are simpler. Foods that have spilt do not burn as quickly. Heat and safety control; the hob supplies or cuts off power immediately when the control knob is turned on.
Familiarise yourself with the appliance These instructions for use are applicable to other hobs. On page 2 an overview of the models is provided, along with information on measurements. The control panel &RQWURO SDQHO IRU FOHDQLQJ SURWHFWLRQ IXQFWLRQ DQG FKLOGSURRI ORFN &RQWURO SDQHO IRU PDLQ VZLWFK ,QGLFDWRUV IRU WLPH SURJUDP IXQFWLRQ &RQWURO GLVF IRU VHOHFWLQJ SRZHU OHYHO DQG WKH WLPH SURJUDP IXQFWLRQ Control surfaces Pressing a symbol activates its corresponding function.
Control discs Storing the control discs The control discs are magnetic. Do not bring the control discs close to magnetic data mediums such as video cassettes, disks, credit cards and other cards with a magnetic strip. They could be damaged. The control discs can also cause malfunctions in televisions and monitors. The power levels and time functions can be set by rotating the control discs. The control discs are removable. Thus, they can be easily cleaned.
Programming the hob This section will show you how to program the hotplates. The table contains power levels and cooking times for several dishes. Switching the hob on and off Selecting the power level: The hob must be switched on. Turn the control disc of the required hotplate until the desired power level is shown on its display. The hob is turned on and off using the main switch. To turn on: press the # symbol. The indicator ‹ for the hotplates is turned on. The hob is ready for use.
Ongoing cooking setting Ongoing cooking time in minutes Rice (with a double amount of water) 2-3 15-30 min Rice pudding 2-3 25-35 min Unpeeled potatoes 4-5 25-30 min Peeled potatoes with salt 4-5 15-25 min Pasta 6 -7* 6-10 min Soups 3-4 15-60 min Vegetables 2-3 10-20 min Greens, frozen foods 3-4 7-20 min Cooked in a pressure cooker 4-5 - Meat roll 4-5 50-60 min Roast 4-5 60-100 min Goulash 3-4 50-60 min Steaks, plain or breaded 6-7 6-10 min Frozen steaks 6-7 8
The Powerboost Function The Powerboost function can be used to heat food more quickly than using the power level Š. To activate Restrictions when using 2. Press the ›symbol. This function is available for all hotplates, provided that the other zone of the same group is not operating (see image). Otherwise, in the visual display of the selected hotplate › and Š will flash; then the power level will automatically set itself to Š. *URXS *URXS *URXS 1.
The timer Once the time has elapsed The timer can be set for periods of up to 99 minutes. It is independent of the other settings. This function does not automatically switch off a hotplate. A warning beep sounds. In the time program function display ‹‹ is shown, and the W indicator comes on. After 10 seconds the indicators turn off. How to program Pressing the 0 symbol turns off the indicators and stops the beep. 1. Press the 0 symbol several times until the W indicator lights up.
Basic settings The device has several basic settings. The settings can be adapted to the user's own needs. Indicator Function ™‚ Childproof lock ‹ Off.* ‚ On. ™ƒ Audible signals ‹ Most signals deactivated. ‚ Some signals deactivated. ƒ All signals activated.* ™† Automatic timer ‹ Switched off.* ‚-ŠŠ Automatic shut-off time ™‡ Duration of the time program function warning signal ‚ 10 seconds*. ƒ 30 seconds. „ 1 minute. ™ˆ Power-Management function ‹ = Deactivated.* ‚ = 1,000 W. minimum power. ‚.
Care and cleaning The advice and warnings contained in this section aim to guide you in cleaning and maintaining the hob, so that it is kept in the best possible condition Hob ã=Risk of injury!! The blade is extremely sharp. Risk of cuts. Protect the blade when not in use. Replace the blade immediately when any imperfections are found. Care of the appliance Cleaning Clean the hob after each use. This prevents food remains left on the surface from burning.
Indicator Malfunction Measure —‚ Supply voltage outside normal operating limits. Please contact the local electricity board. —ƒ / —„ The hotplate has overheated and switched Wait until the electronic system has cooled down sufficiently before off to protect its working surface. switching it back on. * If the warning persists call the Technical Assistance Service. Do not place hot pans on the control panel.
Siemens-Electrogeräte GmbH Carl-Wery-Straße 34 81739 München DEUTSCHLAND (901027)
