User Manual

CM2N9763en_01

22.02.2008

Building Technologies

763

DESIGO™ PX OPEN

PX PRONTO

The PX PRONTO solution allows the integration of PRONTO trunks and

controllers into the DESIGO PX automation level.

Function

The PX PRONTO solution supports the following trunk and PRONTO data points:

• Read PRONTO data, ZS1 commands 1...20, 125…129

• Write PRONTO data, ZS1 commands 24...29

• Read PRONTO parameters, ZS1 commands 30...49

• Write PRONTO parameters, ZS1 commands 50…68

• Read Trunk data, ZS1 commands 70...75

• Write Trunk data ZS1 commands 76...81

Supported number (absolute limits)

• Number of trunks 2

• Number of PRONTOs per trunk 60

• Number of data points (DESIGO) 2500

PAGE 1
s 9 763 DESIGO™ PX OPEN PX PRONTO The PX PRONTO solution allows the integration of PRONTO trunks and controllers into the DESIGO PX automation level. Function The PX PRONTO solution supports the following trunk and PRONTO data points: • • • • • • Read PRONTO data, Write PRONTO data, Read PRONTO parameters, Write PRONTO parameters, Read Trunk data, Write Trunk data Supported number (absolute limits) • Number of trunks • Number of PRONTOs per trunk • Number of data points (DESIGO) CM2N9763en_01 22.02.
PAGE 2
Topology Types Type PX PRONTO Description Integration solution System limits • The PX PRONTO solution supports 2500 data points on the DESIGO side. • Number of trunks 2 • Number of PRONTOs per trunk 60 Hardware The firmware runs on a PXC00-U modular automation station with a PXA30-RS extension module (see data sheets N9221 and N9281). PXC64-U or PXC128-U, and PXA30-RS1 or PXA30-RS2 are suitable as well. Engineering and commissioning Refer to document CM2Y9763.