User Manual

A6V11295438_enUS_a Siemens Industry, Inc.

Building Technologies Division

INSTALLATION INSERT

Desigo CC v3.0

ATTENTION – READ FIRST

Installation Notes

Desigo CC v3.0 is introducing HTML-based documentation including the installation instructions. The

HTML-based documentation is replacing the PDF based installation documents used in the past. The

following documentation is recommended for each installation type.

To start the documentation, click on the icon in the Desigo CC v3.0 DVD root folder and

the following documentation home page will be displayed.

Upgrading to Desigo CC v3.0

To upgrade Desigo CC from v2.x to v3.0 please refer to the Step-by-Step upgrade instructions

available in the product documentation. Navigate to the following location: Step-by-Step > Installing

the Software > Upgrading the Software from v2.x to v3.0.

Figure 1: Mounting the Adapter Plate in a PAB Enclosure (Black & Red)

NOTE: If you are upgrading a Desigo CC system that connects to either FireFinder XLS or Siemens MXL

panels please contact technical support to obtain the latest Desigo CC upgrade procedure. The introduction

of the Desigo Fire Safety Modular panel has changed the Extension Module (EM) names for the XNET and

FireFinder XLS which requires a specific sequence to be following when upgrading from v2.x to v3.0.

PAGE 1
INSTALLATION INSERT Desigo CC v3.0 ATTENTION – READ FIRST Installation Notes Desigo CC v3.0 is introducing HTML-based documentation including the installation instructions. The HTML-based documentation is replacing the PDF based installation documents used in the past. The following documentation is recommended for each installation type. To start the documentation, click on the icon in the Desigo CC v3.0 DVD root folder and the following documentation home page will be displayed.
PAGE 2
New Desigo CC – Single XNET connection to FireFinder-XLS or MXL panels Follow the Desigo CC Quick Start Guide v3.0 (A6V10401855_enUS_e) available in the Installation Package (DCC-SW-PKG-3P0) and use one of the following project templates to ensure the project is configured according to UL/ULC requirements: • Template_Fire_UL • Template_Fire_ULC New Desigo CC – Multiple fire networks or multi-discipline configurations To install a new Desigo CC v3.
PAGE 3
Cyber security disclaimer Siemens products and solutions provide security functions to ensure the secure operation of building comfort, fire safety, security management and physical security systems. The security functions on these products and solutions are important components of a comprehensive security concept. It is, however, necessary to implement and maintain a comprehensive, state-of-the-art security concept that is customized to individual security needs.
PAGE 4
Document ID A6V11295438_enUS_a P/N A5Q00075468