Datasheet

ManualsBrandsSiemens ManualsAutomationIndustrial Wireless Access Point 450Mbps IP65

Data sheet 6GK5786-2HC00-0AA0

Product type designation SCALANCE W786-2IA RJ45

IWLAN Access Point, SCALANCE W786-2IA RJ45, 2 radios, 6

internal antennas, iFeatures support via key plug, IEEE

802.11a/b/g/h/n, 2.4/5GHz, gross 450 Mbit/s per radio, 1x RJ45 max.

1 Gbit/s, PoE, redundant 24 V DC, terminal block, 110 - 230 V AC via

PS791-2AC IP65, -40..+60 °C, plug slot, WPA2/802.11i/e, observe

national approvals! CERT ID: EAPN-W2-RJ-I3, includes: MPCIE-R1-

ABGN-U3, scope of delivery: Manuals on CD-ROM, German/English,

1x terminal block; for operation outside of USA/Israel

Transmission rate

Transfer rate

● with WLAN / maximum

450Mbit/s

● for Industrial Ethernet

10,100,1000Mbit/s

Transfer rate / for Industrial Ethernet

● minimum

10Mbit/s

● maximum

1000Mbit/s

Interfaces

Number of electrical connections

● for network components or terminal equipment

● for power supply

● for redundant voltage supply

Type of electrical connection

● for network components or terminal equipment

RJ45 socket

● for power supply

2-pole connector (24 V DC) or optionally available power supply

adapter (4-pole 24 V DC or 3-pole 110 to 230 V AC)

design of the removable storage

● C-PLUG

Yes

6GK5786-2HC00-0AA0 Subject to change without notice

Page 1/

Summary of content (7 pages)

PAGE 1
Data sheet Product type designation 6GK5786-2HC00-0AA0 SCALANCE W786-2IA RJ45 IWLAN Access Point, SCALANCE W786-2IA RJ45, 2 radios, 6 internal antennas, iFeatures support via key plug, IEEE 802.11a/b/g/h/n, 2.4/5GHz, gross 450 Mbit/s per radio, 1x RJ45 max. 1 Gbit/s, PoE, redundant 24 V DC, terminal block, 110 - 230 V AC via PS791-2AC IP65, -40..+60 °C, plug slot, WPA2/802.
PAGE 2
● KEY-PLUG Yes Interfaces / wireless Number of radio cards / permanently installed 2 Transmission mode / for multiple input multiple output (MIMO) 3x3 Number of spatial streams 3 Number of internal antennas 6 Antenna gain compared to spherical radiator / of the WLAN antenna ● in the 2.4 GHz frequency band 3 dB ● in the 5 GHz frequency band 4 dB Supply voltage, current consumption, power loss Type of voltage / of the supply voltage DC Supply voltage / 1 ● from terminal block 19.
PAGE 3
Ambient condition / for operation When using the power supply 100 to 240 V AC, an operating temperature of -40 °C to +60 °C is permissible Protection class IP IP65 Design, dimensions and weight Width / of the enclosure / without antenna 251 mm Height / of the enclosure / without antenna 251 mm Depth / of the enclosure / without antenna 72 mm Net weight 2.
PAGE 4
● configuration with STEP 7 in the TIA Portal Yes ● operation with IWLAN controller No ● operation with Enterasys WLAN controller No ● forced roaming on IP down with IWLAN Yes ● forced roaming on link down with IWLAN Yes ● WDS Yes Protocol / is supported ● Address Resolution Protocol (ARP) Yes ● ICMP Yes ● Telnet Yes ● HTTP Yes ● HTTPS Yes ● TFTP Yes ● DCP Yes ● LLDP Yes Identification & maintenance function ● I&M0 - device-specific information Yes ● I&M1 – higher-level designa
PAGE 5
● STP/RSTP Yes ● MSTP Yes ● RSTP Yes Product functions / Security Product function ● ACL - MAC-based Yes ● Management security, ACL-IP based Yes ● IEEE 802.1x (radius) Yes ● NAT/NAPT No ● access protection according to IEEE802.
PAGE 6
● NEMA4X Yes ● Power-over-Ethernet according IEEE802.3at for type 1 and IEEE802.3af Yes ● Power-over-Ethernet according to IEEE802.3at for type 2 Yes Standard for wireless communication ● IEEE 802.11a Yes ● IEEE 802.11b Yes ● IEEE 802.11e Yes ● IEEE 802.11g Yes ● IEEE 802.11h Yes ● IEEE 802.11i Yes ● IEEE 802.11n Yes Wireless approval You will find the current list of countries at: www.siemens.
PAGE 7
Security information Siemens provides products and solutions with industrial security functions that support the secure operation of plants, solutions, machines, equipment and/or networks. They are important components in a holistic industrial security concept. With this in mind, Siemens’ products and solutions undergo continuous development. Siemens recommends strongly that you regularly check for product updates.