Data Sheet

ManualsBrandsSIEMENS ManualsSiemens PLCs6ES7522-1BL01-0AB0 PLC digital ouput module

Data sheet 6ES7522-1BL01-0AB0

SIMATIC S7-1500, digital output module DQ 32x24 V DC/0.5 A HF;

32 channels in groups of 8; 4 A per group; Single-channel

diagnostics; Substitute value: Front connector (screw terminals or

push-in) to be ordered separately

General information

HW functional status FS02

Firmware version V1.1.0

Product function

● I&M data

Yes; I&M0 to I&M3

Engineering with

● STEP 7 TIA Portal configurable/integrated as of

version

V13 SP1 / -

● PROFIBUS as of GSD version/GSD revision

V1.0 / V5.1

● PROFINET as of GSD version/GSD revision

V2.3 / -

Operating mode

● DQ

Yes

● DQ with energy-saving function

● PWM

● Cam control (switching at comparison values)

● Oversampling

● MSO

Yes

● Integrated operating cycle counter

Yes

6ES7522-1BL01-0AB0 Subject to change without notice

Page 1/

Summary of content (4 pages)

PAGE 1
Data sheet 6ES7522-1BL01-0AB0 SIMATIC S7-1500, digital output module DQ 32x24 V DC/0.5 A HF; 32 channels in groups of 8; 4 A per group; Single-channel diagnostics; Substitute value: Front connector (screw terminals or push-in) to be ordered separately General information HW functional status FS02 Firmware version V1.1.0 Product function ● I&M data Yes; I&M0 to I&M3 Engineering with ● STEP 7 TIA Portal configurable/integrated as of version V13 SP1 / - ● PROFIBUS as of GSD version/GSD revision V1.
PAGE 2
Supply voltage Rated value (DC) 24 V permissible range, lower limit (DC) 20.4 V permissible range, upper limit (DC) 28.8 V Reverse polarity protection Yes; through internal protection with 7 A per group Input current Current consumption, max. 60 mA Output voltage Rated value (DC) 24 V Power Power available from the backplane bus 1.1 W Power loss Power loss, typ. 3.
PAGE 3
● for redundant control of a load Yes Switching frequency ● with resistive load, max. 100 Hz ● with inductive load, max. 0.5 Hz; According to IEC 60947-5-1, DC-13 ● on lamp load, max. 10 Hz Total current of the outputs ● Current per channel, max. 0.5 A; see additional description in the manual ● Current per group, max. 4 A; see additional description in the manual ● Current per module, max. 16 A; see additional description in the manual Cable length ● shielded, max.
PAGE 4
Isolation Isolation tested with 707 V DC (type test) Standards, approvals, certificates Suitable for safety functions No Suitable for safety-related tripping of standard modules Yes; From FS02 Highest safety class achievable for safety-related tripping of standard modules ● Performance level according to ISO 13849-1 PL d ● Category according to ISO 13849-1 Cat.