Datasheet

ManualsBrandsSiemens ManualsAutomationI/O Module 4AI 28.8VDC Simatic ET 200SP

Data sheet 6ES7134-6HD01-0BA1

SIMATIC ET 200SP, ANALOG INPUT MODULE, AI 4XU/I 2-WIRE

STANDARD, PACKING UNIT: 1 PIECE, FITS TO BU-TYPE A0, A1,

COLOR CODE CC03, MODULE DIAGNOSIS, 16BIT, +/-0,3%

General information

Product type designation AI 4x U/I 2-wire

HW functional status From FS02

Firmware version V2.0

● FW update possible

Yes

usable BaseUnits BU type A0, A1

Color code for module-specific color identification

plate

CC03

Product function

● I&M data

Yes; I&M0 to I&M3

● Measuring range scalable

Engineering with

● STEP 7 TIA Portal configurable/integrated as of

version

V14 / -

● STEP 7 configurable/integrated as of version

V5.6 and higher

● PCS 7 configurable/integrated as of version

V8.1 SP1

● PROFIBUS as of GSD version/GSD revision

One GSD file each, Revision 3 and 5 and higher

● PROFINET as of GSD version/GSD revision

GSDML V2.3

Operating mode

6ES7134-6HD01-0BA1 Subject to change without notice

Page 1/

Summary of content (5 pages)

PAGE 1
Data sheet 6ES7134-6HD01-0BA1 SIMATIC ET 200SP, ANALOG INPUT MODULE, AI 4XU/I 2-WIRE STANDARD, PACKING UNIT: 1 PIECE, FITS TO BU-TYPE A0, A1, COLOR CODE CC03, MODULE DIAGNOSIS, 16BIT, +/-0,3% General information Product type designation AI 4x U/I 2-wire HW functional status From FS02 Firmware version V2.
PAGE 2
● Oversampling No ● MSI No CiR – Configuration in RUN Reparameterization possible in RUN Yes Calibration possible in RUN No Supply voltage Rated value (DC) 24 V permissible range, lower limit (DC) 19.2 V permissible range, upper limit (DC) 28.8 V Reverse polarity protection Yes Input current Current consumption, max. 37 mA; without sensor supply Encoder supply 24 V encoder supply ● 24 V Yes ● Short-circuit protection Yes ● Output current, max. 20 mA; max.
PAGE 3
● -10 V to +10 V Yes; 16 bit incl. sign ● Input resistance (-10 V to +10 V) 120 kΩ ● -5 V to +5 V Yes; 16 bit incl. sign ● Input resistance (-5 V to +5 V) 120 kΩ Input ranges (rated values), currents ● 0 to 20 mA Yes; 15 bit ● Input resistance (0 to 20 mA) 100 Ω; + approx. 0.7 V diode forward voltage ● 4 mA to 20 mA Yes; 15 bit ● Input resistance (4 mA to 20 mA) 100 Ω; + approx. 0.7 V diode forward voltage Cable length ● shielded, max.
PAGE 4
Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency ● Series mode interference (peak value of interference < rated value of input range), min. 70 dB ● Common mode voltage, max. 10 V ● Common mode interference, min.
PAGE 5
Ambient conditions Ambient temperature during operation ● horizontal installation, min. -30 °C ● horizontal installation, max. 60 °C ● vertical installation, min. -30 °C ● vertical installation, max. 50 °C Altitude during operation relating to sea level ● Installation altitude above sea level, max. 2 000 m; On request: Installation altitudes greater than 2 000 m Dimensions Width 15 mm Height 73 mm Depth 58 mm Weights Weight, approx.