Datasheet

ManualsBrandsSiemens ManualsAutomationInput Module SIMATIC ET 200SP

Data sheet 6ES7134-6GD01-0BA1

SIMATIC ET 200SP, ANALOG INPUT MODULE, AI 4XI 2-/4-WIRE

STANDARD, PACKING UNIT: 1 PIECE, FITS TO BU-TYPE A0, A1,

COLOR CODE CC03, MODULE DIAGNOSIS, 16BIT, +/-0,3%

General information

Product type designation AI 4xI 2-/4-wire ST

HW functional status From FS02

Firmware version

● FW update possible

Yes

usable BaseUnits BU type A0, A1

Color code for module-specific color identification

plate

CC03

Product function

● I&M data

Yes; I&M0 to I&M3

● Measuring range scalable

Engineering with

● STEP 7 TIA Portal configurable/integrated as of

version

V14 / -

● STEP 7 configurable/integrated as of version

V5.6 and higher

● PCS 7 configurable/integrated as of version

V8.1 SP1

● PROFIBUS as of GSD version/GSD revision

One GSD file each, Revision 3 and 5 and higher

● PROFINET as of GSD version/GSD revision

GSDML V2.3

Operating mode

6ES7134-6GD01-0BA1 Subject to change without notice

Page 1/

Summary of content (4 pages)

PAGE 1
Data sheet 6ES7134-6GD01-0BA1 SIMATIC ET 200SP, ANALOG INPUT MODULE, AI 4XI 2-/4-WIRE STANDARD, PACKING UNIT: 1 PIECE, FITS TO BU-TYPE A0, A1, COLOR CODE CC03, MODULE DIAGNOSIS, 16BIT, +/-0,3% General information Product type designation AI 4xI 2-/4-wire ST HW functional status From FS02 Firmware version ● FW update possible Yes usable BaseUnits BU type A0, A1 Color code for module-specific color identification plate CC03 Product function ● I&M data Yes; I&M0 to I&M3 ● Measuring range scalable
PAGE 2
● Oversampling No ● MSI No CiR – Configuration in RUN Reparameterization possible in RUN Yes Calibration possible in RUN No Supply voltage Rated value (DC) 24 V permissible range, lower limit (DC) 19.2 V permissible range, upper limit (DC) 28.8 V Reverse polarity protection Yes Input current Current consumption, max. 37 mA; without sensor supply Encoder supply 24 V encoder supply ● 24 V Yes ● Short-circuit protection Yes ● Output current, max. 20 mA; max.
PAGE 3
● 4 mA to 20 mA — Input resistance (4 mA to 20 mA) Yes; 15 bit 100 Ω; + approx. 0.7 V diode forward voltage in 2-wire operation Cable length ● shielded, max. 1 000 m Analog value generation for the inputs Measurement principle integrating (Sigma-Delta) Integration and conversion time/resolution per channel ● Resolution with overrange (bit including sign), max. 16 bit ● Integration time, parameterizable Yes ● Interference voltage suppression for interference frequency f1 in Hz 16.
PAGE 4
● Limit value alarm No Diagnostic messages ● Monitoring the supply voltage Yes ● Wire-break Yes; at 4 to 20 mA ● Short-circuit Yes; 2-wire mode: Short-circuit of the encoder supply to ground or of an input to the encoder supply ● Group error Yes ● Overflow/underflow Yes Diagnostics indication LED ● Monitoring of the supply voltage (PWR-LED) Yes; Green LED ● Channel status display Yes; Green LED ● for channel diagnostics No ● for module diagnostics Yes; Green/red LED Potential separation