Datasheet

ManualsBrandsSIEMENS ManualsRack & DIN Rail Mount PSUsSITOP smart DIN Rail Power Supply 24Vdc 5A 120W, 1-Phase

Product data sheet 6EP1333-2BA20

SITOP PSU100S 24 V/5 A STABILIZED POWER SUPPLY

INPUT: 120/230 V AC OUTPUT: 24 V/5 A DC

Technical specifications

Product SITOP PSU100S

Power supply, type 24 V/5 A

Input

Input 1-phase AC

Supply voltage / 1 / at AC / nominal value 120 V

Supply voltage / 2 / at AC / nominal value 230 V

Voltage range

• Note Automatic range selection

Input voltage / 1 / at AC 85 … 132 V

Input voltage / 2 / at AC 170 … 264 V

Wide-range input No

Overvoltage resistance 2.3 × Vin rated, 1.3 ms

Mains buffering at Iout rated, min. 20 ms

Mains buffering at Vin = 93/187 V

Rated line frequency 50 / 60 Hz

Rated line range 47 ... 63 Hz

Input current / at nominal level of the input voltage 120 V 2.34 A

Input current / at nominal level of the input voltage 230 V 1.36 A

Switch-on current limiting (+25 °C), max. 40 A

Built-in incoming fuse T 3,15 A/250 V (not accessible)

6EP1333-2BA20

Page 1/ 11/01/2012

subject to modifications

Summary of content (4 pages)

PAGE 1
Product data sheet 6EP1333-2BA20 SITOP PSU100S 24 V/5 A STABILIZED POWER SUPPLY INPUT: 120/230 V AC OUTPUT: 24 V/5 A DC Technical specifications Product SITOP PSU100S Power supply, type 24 V/5 A Input Input 1-phase AC Supply voltage / 1 / at AC / nominal value 120 V Supply voltage / 2 / at AC / nominal value 230 V Voltage range • Note Automatic range selection Input voltage / 1 / at AC 85 … 132 V Input voltage / 2 / at AC 170 … 264 V Wide-range input No Overvoltage resistance 2.
PAGE 2
Protection in the mains power input (IEC 898) Recommended miniature circuit breaker: from 6 A, characteristic C Output Output Controlled, isolated DC voltage Rated voltage Vout DC 24 V Total tolerance, static ± 3% Static mains compensation, approx. 0.1 % Static load balancing, approx. 1% Residual ripple peak-peak, max. 150 mV Residual ripple peak-peak, typ. 30 mV Spikes peak-peak, max. (bandwidth: 20 MHz) 240 mV Spikes peak-peak, typ. (bandwidth: 20 MHz) 140 mV Adjustment range 22.
PAGE 3
Current limitation 6 … 7.1 A Characteristic feature of the output / short-circuit protected Yes Short-circuit protection Constant current characteristic Enduring short circuit current / Effective level / typical 7.1 A • Note Overload/short-circuit indicator overload capability 150 % Iout rated up to 5 s/min - Safety Primary/secondary isolation Yes Potential separation Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178 Protection class Class I stray current / maximum 3.
PAGE 4
Depth / of the housing 125 mm Installation width 50 mm Mounting height 225 mm Weight, approx. 0.5 kg Product feature / of the housing / housing for side-by-side mounting Yes Type of mounting / wall mounting No Type of fixing / cap rail mounting Yes Type of mounting / S7-300 rail mounting No Installation Snaps onto DIN rail EN 60715 35x7.